User manual
CHAPTER 3
Menu System
intellaspot
TM
XT-1 User Manual 37
Temperatures Menu
The intellaspot fixture contains temperature sensors that
track current, maximum and minimum temperatures
produced in the unit. Sensors monitor the air
temperature of the electronics housing and the lamp
housing.
Initially, the setting for current, maximum and minimum
temperatures are equal. As the sensor detects
temperature changes, the fixture adjusts the minimum
and maximum settings.
To view maximum temperature the LED System reached
since the last reset:
1. Navigate to and select the Information Menu (see
Information Menu on page 35).
2. Use the left and right arrows on the Center button to
scroll to the
Temperatures Menu and press the Enter
button to select.
3. Use the left and right arrows on the Center button to
scroll to
MaximumTemp. Press the Enter button to
select.
To reset all the temperature readings back to the current temperature:
1. After navigating to and selecting the Temperatures
Menu, use the left and right arrows on the Center
button to scroll to
TempReset. Press the Enter
button to select. The display will read
NO. Use the up
and down arrow to scroll to
YES.
2. Press the Enter button and hold for 5 seconds to
reset all sensors to the current temperature in
centigrade.
DMX
[
]
Topbox:35C
DMX
[
]
Temperatures
Menu
DMX
[
]
Maximum
TempMenu
DMX
[
]
Temperature
Reset:No