User manual

CHAPTER 3
Menu System
32 intellaspot
TM
XT-1 User Manual
Test Options Menu
This menu lets you Home the fixture, test the mechanical
functions, control the Lamp, set Display brightness level,
and manage Encoder functions. You can also perform
Motor Setup and Copy Boot Code procedures when
needed during fixture maintenance.
To Enter the Test Options Menu:
1. Press the Menu button to unlock the menu system or
to move back up the system to the top level menus.
2. Use the left and right arrows on the Center button to
scroll to the
TestOptionsMenu and press the
Enter button to select. The screen will display the
TEST icon in the screen banner and the first option of
the next menu level.
Homing the Fixture
The intellaspot fixture automatically homes whenever it
is turned on. To manually home the fixture:
1. Unlock the menu system and navigate to the TestOptionsMenuas shown above. The first
option you will see is
HomeFixture. The default safe option is No.
2. Press the Enter button to select.
3. Use the up and down arrows on the Center button to scroll to Yes.
4. Press the Enter button to select. The fixture will begin homing.
Lamp State
The LampState setting in the TestOptions menu lets
you manually turn the lamp
On or Off. To manually
change the lamp state:
1. Unlock the menu system and navigate to and select
the
TestOptionsMenuas shown above.
2. Use the right and left arrows on the Center button
to scroll to the
LampState option and press the
Enter button to select. The display will show the
current lamp state as either
On or Off.
3. Use the up and down arrows on the Center button to scroll to the other state and press the
Enter button to select.
Note: If you are unable to change the state, check the Information Menu (see Lamp
Status on page 39).
DMX
[ ]
TestOptionsMenu
DMX
[ ]
HomeFixture:
No
DMX
[ ]
LampState:
On