User manual

CHAPTER 3
Menu System
30 intellaspot
TM
XT-1 User Manual
Lamp Strike Mode
This menu option lets you choose when the lamp will
strike (turn on).
To set theLampStrikeMode:
1. Navigate to and select the SetParametersMenu,
(see Set Parameters Menu on page 27).
2. Using the left and right arrows on the Center
button, scroll to
LampStrikeMode.
3. Using the up and down arrows on the Center
button, choose
Auto to strike the lamp as soon as
data is received,
PowerOnto strike the lamp as soon as power is applied, or Manual to strike
the lamp when you send a Lamp On command from the DMX console.
4. Press the Enter button to select.
Data Source
Every fixture automatically defaults to DMX as a data
source. If your fixture is equipped with a
WIFI or other
NETWORK card, you can use the menu option to select
that as a data source. The display screen will show any
connection options installed on your fixture.
To change the data source:
1. Navigate to and select the SetParametersMenu,
(see Set Parameters Menu on page 27).
2. Using the left and right arrows on the Center
button, scroll to
DataSource and press the Enter button to select. The default data source
DMX will be displayed.
3. Use the up and down arrows on the Center button to scroll to WiFi or NETWORK (for example,
Art-Net) and press the Enter button to select.
DMX
[ ]
LampStrike
Mode:Auto
DateSource:DMX