User manual

CHAPTER 3
Menu System
24 intellaspot
TM
XT-1 User Manual
Information
Menu
LampHours:
Lamp operation time in
hours:minutes
LampStrikes:
Current number of lamp strikes
LampHr/Strike
Reset:###
NO
Default “safe” setting
YEs
Press Enter for 5 seconds to
reset fixture hours to 0
LampStatus:
LampOff
Current lamp
status
LampOn
LampStriking
LampError
DisplayErrors
Menu
XXXXXXXXXXXXX
XXXXXXXXXXXXX
Scrolls through errors displayed
in 2-line, 16-character format
SoftwareVersion: L##.##.###
Status Major.Minor.Build
ModuleVersionMenu
Pan
HW:#SW:#
Displays the Hardware and
Software versions for each
logic board in the fixture.
Tilt
HW:#SW:#
Animate/FX
HW:#SW:#
Dim/Cyn/CTO/Iris
HW:#SW:#
Dim/Mag/Yel/Clr
HW:#SW:#
Litho1/Litho2
HW:#SW:#
Focus/Frost/Zoom
HW:#SW:#
Display‐
L##.##.###
Status Major.Minor.Build
ChannelsNeeded:##
Displays channel range for the
unit as configured
NextDMXChannel:##
Current channel range + 1
Note: The display reads
LinkFullif there is not a
sufficient channel range
remaining on the DMX link.
Menu Level 2 Level 3 Option/Setting Description/Notes