User manual

CHAPTER 3
Menu System
intellaspot
TM
XT-1 User Manual 19
Display in Menu Locked Mode
The intellaspot display panel gives access to the fixture’s
onboard Menu System. When the Menu System is in locked
mode, the panel displays in large 8-character format
designed to be viewed from a distance. Under normal
circumstances, when the display is locked, it cycles
between:
• the intellaspot model
• fixture software version
[V##.##]
• fixture’s DMX start channel [DMX_C###].
• any errors present
Fixture Software Version
The software version loaded on the fixture can vary even between units purchased at the same
time. The latest software version is always posted on the High End Systems website
(www.highend.com/support).
DMX Start Channel
The DMX Start Channel is the first channel currently assigned to that fixture in its range of
channels on a DMX link. To reset the DMX start channel, see
Address Menu on page 25. For more
information on DMX Start channels, see Determining DMX Start Channel Assignment on page 26.
Error Message Display
Errors are displayed in large 8-character form when the menu system is locked. Unlocked, the
menu system’s 2-line format displays more detailed information. For information on accessing the
detailed error message, see
Display Errors Menu on page 39.
Unlocking the Menu System
To unlock the menu system after the fixture is powered up, press and hold the Menu button
until the display changes. You will need to hold the Menu button for a few seconds before the
menu unlocks to protect against an inadvertent menu change. ADDRESS is the Menu screen you
will view.
Exiting the Menu System
To exit the menu system, keep pressing the Menu button to back out of each menu level until the
display switches back to the large 8-character format and, after a few seconds, begins the
standard display for the locked mode as described above.
DMXC001