User manual

CHAPTER 3
Menu System
18 intellaspot
TM
XT-1 User Manual
Navigation Buttons
Note: The intellaspot fixture can sense orientation and automatically inverts
the display and button functions when the fixture is mounted upside
down.
Battery Mode
Before applying power, you have the option to address the fixture in battery mode. Setting the
DMX start channel is the only function allowed in battery mode, (see
Setting a Start Channel in
Battery Mode on page 25). For all other fixture configuration functions, you need to power up the
unit and enter the full Menu system.
Navigation Basics
1. When the fixture is on, you can unlock the Menu system by pressing the Menu button for a
few seconds until the display goes to the 2-line format.
2. Use the left and right arrows on the Center button to scroll through menu options at the
current level.
3. Stop at the desired menu and press the Enter button to select.
Note: The new option will not be stored unless the Enter button is pressed.
4. If there is another level of menu choices repeat Steps 2 and 3.
5. At the option or setting level of the menu, use the Up and Down arrows on the Center
button to scroll to the desired option or setting. The option flashes until the Enter button is
pressed. Pressing the Enter button stores the new value for that option. Pressing the
Menu button returns to the previous menu level without changing the value of an option.
6. Continue pressing the Menu button to move back up levels until exiting the Menu system.
Menu button (on the left
when viewing the display)
unlocks the menu or
moves back to the
previous menu level.
Enter button (on the
right when viewing the
display) selects the
currently displayed
menu value or option.
Left and Right arrows move through
the current menu level options
Up and Down arrows select from
available value or setting options.
Use the four-way Center button to navigate through levels
Press and hold both the Menu and Enter buttons
to access the battery mode.