Specification

60” CAST IRON Cat. No.
ROLL TOP TUB CTR60
Features:
►Inside finish is white enamel
►Ball and claw feet available in 6 finishes
►Tub exterior is white (epoxy)
►3 3/8” centers in tub wall
►Non-skid strips
►Feet are attached and leveled before shipment
►Tub is thoroughly inspected before shipment
►Cast Iron base available: part# CIBR60
Gallon Capacity: 40
Shipping Weight: 500 lbs.
Empty Weight: 287 lbs.
Filled Weight: 622 lbs.
L: 60 3/4”
W
: 30 1/2”
H: 23 1/4” (from floor to top of tub)
18 5/8” (from bottom of tub to top
of tub)
P 847•244•1234 www.barclayproducts.com
Meets or exceeds the following
specifications: A112-19-1M 1994.
12/29/09
Dimensions of fixture are nominal and may vary within the range of tolerances established by ANSI Standard A112.19.2. Dimensions and
specifications subject to change without notice.
Foot Finishes:
BP Polished Brass
CP Polished Chrome
PN Polished Nickel
SN Brushed Nickel
WH White
ORB Oil-rubbed Bronze
The following is recommended for CTR60
tubs with faucet holes:
•Tub wall-mounted faucets or hand-held
showers: part# 4022, 0425 or 4035
•Tub wall-mounted faucets for use with
risers: part# 4001, 4023, 4030 or 4031
Double offset bath supplies: part #5576
Leg tub drain: part #5599
•Complete shower unit: part# 4124, 4143
Extra Paint Charge (inside of tub is always white enamel):
Bisque Paint - $160 Black Paint - $160
Bathtubs painted in bisque or black are considered “special
order” and are not returnable.
Bisque or black painted feet are available at same
price as white feet.

Summary of content (4 pages)