Installation Guide

Easy Install
Tub Drain pg.2
Cat. No.
5598-ITD
P 847•244•1234 www.barclayproducts.com
01/09/2019
9. Install your flooring surface
around the opening of the
Drop-In Drain.
10. Remove the Drop-In Drain
cap with a channel lock
plyer.
11. Apply provided lubricant
inside the Drop-In Drain
Please only proceed with
this step once the pressure
test has been performed, if
needed.
12. Affix the appropriate
tailpiece to the waste
& overflow.
Ensure the
measurement
between the base of
the Drop-In Drain
and the P-trap will
accomadate the
tailpiece
Warning: Do not cut
the brass tailpiece
as this may cause
leakage.
13. Apply provided
lubricant halfway up
the tailpiece and
position the bathtub
and tailpiece in line
with the Drop-In Drain.
14. With caution, slowly
insert the bathtub
tailpiece into the
Drop-In Drain.
8. Secure the Drop-In Drain
to the subfloor with
screws or cement.