Getting Started Guide

5/6
6/6
U-Spot DUO activation
U-Spot DUO activation
d) Activate the sensor
On each sensor, with the next order of actions, doing it from the top front of the
sensor.
This will power on and send the configuration previously selected to the sensor
and synchronize it with the Fastprk platform.
❑ Discover: show Sensor ID and Status
❑ Get all data: retrieve the configuration from the sensor
❑ Set configuration: apply current configuration to the node
❑ Manual Sync: synchronize sensor information log files with the Fastprk backend
platform
❑ Option 2: Import a configuration file
From the sidebar menu go to ‘Choose config file’ > ‘Browse file’, to load a specific
configuration file, if required.
If you are experiencing issues on the Activation process, please use the ‘Share log’
option to send the configuration log to Urbiotica technical support team for further
assistance.
NOTE: It is very important that there are no parked cars or metallic elements
(tools, barriers, etc...) near the sensor during the activation as its first magnetic
calibration value will be defined at that moment.