Specifications

Barbieri Spectropad
Operating Manual Spectropad Series 2 - Page 9
2.2 usB ConneCtIon
Before connecting the instrument to the computer, please install the
Barbieri Gateway measuring software supplied on the USB stick/CD
accompanying your instrument.
This will also install the required USB driver.
Then connect the instrument with your computer and launch the Bar-
bieri Gateway software.
Installing on a Mac computer under OS X
Switch off the Spectropad. Insert the supplied USB stick/CD-Rom into
your computer, run the Gateway Installer program and follow the in-
structions.
Check if driver is correctly installed:
• Switch on instrument
• Open “System Information” (About this Mac/ More info...)
• Show the “System Report” and check “Hardware/ USB”. The in-
strument “Spectropad” must be listed