Specifications

Barbieri Spectropad
Page 10 - Operating Manual Spectropad Series 2
Installing on a PC with Microsoft Windows XP or later
Switch off the Spectropad. Insert the supplied USB stick/CD-Rom into
your computer, run the Gateway Installer program and follow the in-
structions.
The USB driver is now on your computer.
• Connect the Spectropad to the computer using the supplied USB
cable.
• Switch the Spectropad on.
There are two drivers to be installed for the connection between your
computer and Spectropad:
1. High speed USB to serial converter
2. USB virtual serial port driver
The installation procedures are guided automatically by an installation
wizard.
Note: The two installations follow automatically each other!
Your new Hardware is now installed and ready for use!