Specifications

尺寸：75*110mm
材质：128双铜 正反面印刷 风琴折
Charging for the earbuds:
Plug the provided Type-C charging cable into the bottom
of charging station, the bottom LED light will flash white.
When charging is complete, the bottom LED and inside 4
LED turn solid white.
LED1 light up white= battery 25%-5%
LED1,LED2 light up white =battery 50%-25%
LED1,LED2, LED3 light up white=battery 75%-50%
LED1,LED2,LED3,LED4 light up white=battery 100%-75%
Charging time: 2hoursCharging time: 2 hours
Please fully charge before first use.
Place the earbuds into the case as they will charge
automatically by the magnet.
The LED light of earbuds will turn solid red, Once
charging is complete, LED lights of earbuds will turn solid
white for 1min then turn off.
Charging time: around 2hours
Playing time: around 7.5hours
Charge your charging station:
Take out both earbuds from the charging case, the
earbuds LED will flash white thrice, They will begin
auto-pairing with each other.
You will hear a prompt sound to confirm successful
pairing. The one earbud LED will flash red and white, the
other flash white twice per 5s.
Pairing:
Connect to your device
Activate the Bluetooth function on your device to search
for “RT26” and connect it.
You will hear a prompt from both earbuds, Both earbuds
LED lighting white for 2s.
It is ready to use.
Each earbud can be used independently.
Touch right or left earbuds 2 times：Answer an incoming
call/ End an ongoing call
Keep touching right or left earbuds for 2 seconds: reject a
call
Keep touching right or left earbuds for 5 seconds until you
hear a prompt: activate the voice assistant (Siri or Google
assistant)
Multi-function Touch control
Touch left or right earbuds 2 times: Play/Pause
Touch right earbuds 3 times: Next song
Touch left earbuds 3 times: Previous song
(PS：Reset button on backside of charging case, press
the button 6s to restore settings.)
Listening to Music:
1.Put the earbuds back in the charging case and it will be
power off and charged automatically.
2.Keep touching 8s
3.Without connecting any device for 5mins, it will be
power off automatically.
LED turns red for 1s while earbuds power off.
Power off
Bluetooth version：5.3
Power output：3mW
Speaker size：D6mm*2
Frequency response: 20HZ-20KHZ
Battery built-in earpiece: 50mAh*2
Charging station battery: 600mAh 3.7V
Charging current for charging station: 400mA DC5V
Product’s specification
FCC COMPLIANCE STATEMENT:
-Bluetooth earbuds
-Charging case
-Type-C cable
-S,M,L 3 sizes silicon earplugs.
What is in the box?
RT26
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired
operation.
Note: This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference
by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and
receiver.
Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician
for help.
Warning: Changes or modifications to this unit not
expressly approved by the part responsible for compliance
could void the user’s authority to operate the equipment.
FCC Radiation Exposure Statement
The device has been evaluated to meet general RF
exposure requirement.
The device can be used in portable exposure condition
without restriction.