User Guide

F-24396-1 © Copyright 2006 TAC All Rights Reserved. 3
Flow Characteristics
See Figure-1 for typical flow characteristics of VB-7332 series three-way sequencing valve
bodies.
Figure-1 Typical Flow Characteristics.
Temperature/Pressure Ratings
See Figure-2 for temperature and pressure ratings. Consult the appropriate valve linkage
general instruction sheet for the effect of valve body ambient temperatures on specific
actuators. Ratings conform with published values and disclaimer.
VB-7332-0-4-P (45° SAE Flared Cast Bronze Body)
Standards: Pressure to ANSI B16.15 Class 250 with 400 psig up to 150°F decreasing to
321 psig at 281°F
Materials: Bronze, ASTM B584
Figure-2 Temperature and Pressure Ratings
for VB-7332 Series Valve Bodies.
% of Rated Stroke
Stem UpStem Down
0
100
% of Maximum Flow
Flow "B" to "AB"
Flow "A" to "AB"
50
Mid-Stroke
50
(345)
250 (121)
200 (93)
150 (65)
100 (38)
50 (10)
300 (149)
150
(1034)
250
(1724)
350
(2458)
100
(689)
Pressure — psig (kPa)
321 psig
(2218 kPa)
Temperature — °F (°C)
200
(1379)
300
(2068)
400
(2758)
Maximum Media
Temperature
281°F (138°C)
Minimum Fluid
Temperature
20°F (-7°C)
VB-7332-0-4-P