Brochure

2-Way Stainless Steel Globe Valves, Screwed (1/2 to 3/4 in.) with Hydraulic,
Pneumatic Actuators
F-27414-1 © Copyright 2006 TAC. All Rights Reserved. 51
TABLE 2. Select Actuator Type
having sufficient close-off for the
application. Also, select valve linkage.
See Table 3 for actuator part number
having correct voltage and input
signal.
Input Signal
Two-Position SPST
Floating SPDT
Electronic Vdc 4 to 20 mA
135 Ohm Slidewires
Pneumatic
Valve
Linka
ge
1/2 to 3/4 in. Valve
AV-600
AV-600
a
a
MF-5X1X, MP-541X, MPR-5XXX use AV-600 and AV-601. Do not use AV-7400 or AV-7600-1 valve linkages on VBS-9263 valve bodies.
AV-400
Positive Positioner
— AK-42309-500
Actuator
MF-5X1X
MA-521X-XXX
MP-5X1X
MPR-5X1X
MK-2690
Actuator Spring Range in psig
— 3 to 7 5 to 10 8 to 13
N.P. Valve Body P Code Size in.
ACTUATOR CLOSE-OFF PRESSURE RATING (psi)
b c
b
Close-off rated for ANSI IV (.01%) with pressure at inlet (port A). Ratings for normally open valves are with indicated supply air pressure applied to actu-
ator. Ratings for normally closed valves are within 1 psi or less applied to actuator (for kPa multiply C
v
by 6.89).
c
Close-off pressure ratings describe only the differential pressure which the actuator can close-off with adequate seating force. Consult valve body spec-
ifications for other limitations.
N.O.
VBS-9263-0-6-P
-01
1/2 130 130 15 110 180
-02
-03
-04
-31
-33
-34
-35
-36
-37
-38
-39
-05
3/4 80 80 — 40 70-06
45