Brochure

2-Way Globe Valves, Screwed (1/2 to 3 in.), Union Sweat (1/2 to 2 in.) and
Flanged (2-1/2 to 6 in.) with Electric Gear Train Actuators
32
© Copyright 2006 TAC. All Rights Reserved. F-27414-1
TABLE 1. Select Valve Body including
P Code (Valve Size, Cv Rating, Port Code) or
select Valve Assembly with correct Input
Signal (refer to Table 3 also) less Actuator
Code (XXX) including the P Code (Size, Cv
Rating, Port Code). (Refer to Pages 172 to
179 for Valve Sizing.)
Application
Chilled or Hot Water 281°F Max.
35 psig Steam
Hot Water
340°F Max.
100 psig Steam
Hot Water
400°F Max.
150 psig Steam
Screwed NPT Screwed NPT Union Sweat Flanged Screwed NPT
Size 1/2 to 2 in. 2-1/2 & 3 in. 1/2 to 2 in. I.D. 2-1/2 to 6 in. 1/2 to 2 in. 1/2 to 2 in.
Valve Body (stem down to close) Actuator Provides Normal Position VB-7213-0-4-P VB-9213-0-4-P VB-7214-0-4-P VB-9213-0-5-P VB-7253-0-4-P VB-7273-0-4-P
Normal
Position
Actuator Series Input Signal Factory Available Assemblies
N.O. or N.C.
(Refer to
Table 3)
MA-318-XXX, MA-418-XXX,
MA-419-XXX
SPST (Refer to Table 3) VA-7213-3XX-4-P VA-9213-3XX-4-P ————
MP-36X, MP-37X, MP-46X,
MP-47X, MP-46XX,
MP-47XX
(Refer to Table 3C) VP-7213-3XX-4-P VP-9213-3XX-4-P VP-9213-3XX-5-P ——
MP-461-600, MP-471-600
2 to 15 Vdc (Refer to Table 3B
and Table 3C)
VS-7213-3XX-4-P VS-9213-3XX-4-P VS-9213-3XX-5-P ——
MS-7913, MS-7923 (Refer to Table 3G) VM-7213-3XX-4-P VM-9213-3XX-4-P VM-9213-3XX-5-P
——
No
Normal
Position (Non-
Spring
Return) (Refer
to Table 3)
MF-22XX3
a
, MF-631X3
a
MF-22203 for hot water and steam applications only.
Floating SPDT
Multiple Input
(Refer toTable 3C or Table 3E)
VF-7213-25X-4-P
VF-7213-3XX-4-P
VF-9213-30X-4-P VF-7214-25X-4-P VF-9213-30X-5-P ——
MS-22353
2 to 10 Vdc, 4 to 20 mAdc (Refer
to Table 3C)
VS-7213-256-4-P —————
MC-351, MC-4X1, MC-4XX1
SPDT, Snap Acting
(Refer to Table 3A)
VC-7213-4XX-4-P VC-9213-4XX-4-P VC-9213-4XX-5-P ——
MP-38X, MP-445, MP-48X,
MP-48XX
(Refer to Table 3C) VP-7213-4XX-4-P VP-9213-4XX-4-P VP-9213-4XX-5-P ——
MP-9XXX (Refer to Table 3C) VP-9213-9XX-5-P ——
MP-481-600
2 to 15 Vdc, TAC System 8000
(Refer to Table 3B and
Table 3C)
VS-7213-4XX-4-P VS-9213-4XX-4-P VS-9213-4XX-5-P ——
MM-400-XXX or
MMR-400-XXX
(Refer to Table 3E) VM-7213-4XX-4-P VM-9213-4XX
-4-P V
M-9213-4XX-5-P ——
NOTE: These charts are
color coded as shown
below to assist valve
selection. Note it is
possible to select either a
valve assembly or
component parts (actuator,
valve linkage, valve body).
1. Valve Assembly:
VS-9213-462-5-14
2. Valve Body:
VB-9213-0-5-14
Actuator: MP-481-600
Linkage:
Valve Body Data less P
Code (Size, Cv Rating,
Port Code) or Valve
Assembly less Actuator
Code (XXX) and less P
Code (Size, Cv Rating,
Port Code)
P Code (Size, Cv Rating,
Port Code)
Actuator or Actuator
Code (XXX) for Valve
Assemblies
Flow Type Equal % (Refer to page 170) Modified Linear (Refer to page 170)
Material
Body Bronze Bronze Bronze Cast Iron Bronze Bronze
Seat Bronze Bronze Bronze Bronze Stainless Steel Stainless Steel
Stem Stainless Steel Stainless Steel Stainless Steel Stainless Steel Stainless Steel Stainless Steel
Plug Brass Brass Brass Brass Stainless Steel Stainless Steel
Packing Spring Loaded TFE Spring Loaded TFE Spring Loaded TFE Spring Loaded TFE Spring Loaded TFE Spring Loaded TFE
Disc Composition Composition Composition Composition Teflon None
ANSI Pressure Class (psig)
Refer to page 169
250 (up to 400 psig below 150°F)
125 (200 psig below
150°F)
250 (up to 400 psig below 150°F)
Maximum Inlet Pressure Steam
psig (kPa)
35 (241) 35 (241) 100 (690) 150 (1034)
Allowable Control
Media Temp
b
b
CAUTION: Freeze protection required for fluid temperatures below 32°F (0°C). Avoid ice formation on stems.
20 to 281°F
(-7 to 138°C)
40 to 281°F
(4 to 138°C)
20 to 281°F
(-7 to 138°C)
40 to 281°F
(4 to 138°C)
20 to 340°F
(-7 to 171°C)
20 to 400°F
(-7 to 205°C)
Allowable Differential Pressure
for Water psig (kPa)
c
Full Open
c
Less than 20 psi recommended for quieter service.
35 psi (241) Max. for normal life
(Refer to page 172 for cavitation limits)
35 (241) 35 (241)
Allowable Differential Pressure
for Steam Full Open
20 psi
(138 kPa)
20 psi
(138 kPa)
20 psi
(138 kPa)
20 psi
(138 kPa)
35 psi
(241 kPa)
50 psi
(345 kPa)
TO SELECT A PORT CODE(P).
P Code Valve Size in. Cv
-1
d
d
Factory assemblies are not available for two-position applications using reduced port valve bodies.
1/2
0.4
0.4
0.4 0.4
-2
c
1.3 1.3 1.3 1.3
-3
c
2.2 2.2 2.2 2.2
-4 4.4 4.4 4.4 4.4
-5
c
3/4
5.5 5.5 5.5 5.5
-6 7.5 7.5 7.5 7.5
-7
c
1
10 10 10 10
-8 14 14 12 12
-9
1-1/4 20 20 20 20
-10
1-1/2
28 28 28 28
-11
2 40 40 40 40
-12
2-1/2
65
56
⎯⎯
-13
3 85 85
-14
4
145
-15
5
235
-16
6 350
2-Way
Globe
Valves,
Screwed
(1/2 to 3
in.),
Union
Sweat
(1/2 to 2
in.) and
Flanged
(2-1/2 to
6 in.)
with
Electric
Gear
Train
Actuator
s
AV-352
Valve Linkage