Brochure

3-Way Globe Valves, Screwed End (15 to 80 mm) with Electric Gear Train
Actuators
156
© Copyright 2006 TAC. All Rights Reserved. F-27414-1
TABLE 4B. 2 to 15 Vdc TAC System 8000 input.
TABLE 4C. Factory Assemblies, Floating Actuators, select Actuator Code (XXX). Refer to Table 4G for optional inputs.
TABLE 4E. Multiple Input. Any MP-3XX, 4XX or 9XXX electric gear train actuator can be assembled to valve bodies with the
close-off pressure ratings listed in Table 2. Select Actuator Type having sufficient close-off for the application. Select actuator,
linkage, valve body and field assemble.
Input Signal Normal Position Voltage Hz VA Aux. Switch Actuator
2-15 Vdc, TAC System 8000,
start 6 Vdc, Factory set
Adj. 2-12 Vdc, 3 Vdc span,
Positive Positioning
Normally Closed
120 60 50 Yes
MP-461-600
Normally Open MP-471-600
None
MP-481-600
MP-481-600 w/AV-352
2-10 Vdc or 4-20 mAdc, Fixed
span and Start point
24 60 50 No MS-22353
Input Signal Normal Position Voltage Hz VA Aux. Switch Actuator
Actuator Code (XXX) for Factory
Available Assembly
SPDT Center Off
Floating, Two SPST, or
Two Triacs
24 50 60 No
MF-22203 252
MF-22303 255
MF-22323 256
SPDT Floating, Two
SPST, or Triacs
MF-63103 301
MF-63123 303
TABLE 4D. MS-79X3 Electric Gear Train Actuators.
Input Signal Normal Position
Voltage
a
a
Factor setting jumper is used to select other voltages: 8 to 11V, 4 to 7 V, 0 to 10 V, 2 to 10 V, 1 to 5 V.
Auxiliary Switches Actuator Actuator Code
Proportional
Extended
6 to 9 V
No
MS-7913 365
Retracted MS-7923 366
Extended
2
MS-7913 367
Retracted MS-7923 368
Normal
Position
Input Signal
Voltage Vac
(Hz)
Aux. Switch Actuator Part Number
2 to 15 Vdc
TAC System
8000
4 to 20 mA
etc.
Slidewire
(Series 90)
SPST
SPDT Snap
Acting
Pneumatic to
Electric
SPDT
Floating
Direct Digital
Control
Normally
Closed
19
2
Yes
Yes
11
Yes
24 (60)
Yes
MP-361
3 4, 10 8, 12 120 (60) MP-465
5 4 8 240 (50) MP5-4651
Normally
Open
1 9 11 24 (60) MP-371
3 4, 10 8, 11 120 (60) MP-475
5 4 8 240 (50) MP5-4751
None
Non-Spring
Return
19
⎯
11 24 (60) MP-381
3 4, 10 8, 12 120 (60) MP-485
5 4 8 240 (50) MP5-4851
1 9 11 24 (60) MP-381 w/AV-352
3 4, 10 8, 12 120 (60) MP-485 w/AV-
352
1
Requires CP-8301-024 or CP-930X ordered separately.
2 Requires AE-504 ordered separately.
3 Requires CP-8301-120 or CP-930X ordered separately.
4 Requires CP-8391-716 or CP-9302 ordered separately.
5 Requires CP-8301-240 or CP-930X ordered separately.
6 Requires CP-8391-456 or CP-930X ordered separately.
7 Requires AM-345 and AE-504 ordered separately.
8 Requires CP-8391-716 or CP-9302 and PP-8311 ordered
separately.
9 Requires CP-8391-913 or CP-930X ordered separately.
10 Requires CP-8391-910 or CP-9302 ordered separately.
11 Requires CP-8391-913 or CP-930X and PP-8311 ordered
separately.
12 Requires CP-8391-910 and PP-8311 ordered separately.
TABLE 4F. Modular Actuator. Refer to
Table 4G for optional inputs.
Normal Position Voltage (50/60 Hz) Aux. Switch Actuator Part No.
Stem Up
24 No
MM-500
Stem Down
None Non-Spring Return MM-400