User Guide

All brand names, trademarks and registered

trademarks are the property of their respective

owners. Information contained within this

document is subject to change without notice.

F-18782-3

www.tac.com

TAC

1354 Clifford Avenue

P.O. Box 2940

Loves Park, IL 61132-2940

4. Insert the dial stop pin in the appropriate hole on either (or both) side(s) of the control

dial to restrict dial rotation.

MAINTENANCE

Open areas at bottom and around base of thermostat should be kept clean and free from

obstructions to allow proper flow of air. If switch contacts need cleaning, this may be done

with a contact burnishing tool (TOOL-13).

FIELD REPAIR

These thermostats are not field repairable. Replace entire device.

DIMENSIONAL DATA

All dimensions are in inches (millimeters in brackets). See Figure-7 .

Setpoint

Dial

Dial Stop Pin

Insertion Holes

Needle Nose

Pliers

Dial Stop

Figure-6 Dial Stop Pin Insertion.

Figure-7 Mounting Ring Dimensions.

3-9/32

Centered

(83)

A A

3-25/32

(96)

2-13/64

(56)

1-13/16

(46)

1-19/64

(33)

4-13/32

(112)

Holes for Mounting:

Hole "A": For mounting on a two-gang electrical box.

Hole "B": For mounting on a single gang electrical box.