User Guide

Limit Control Dial Range

Dial Stop Pin Insertion (See Figure-6)

1. Remove thermostat cover.

2. Secure the control dial with hand so that the dial will not rotate.

3. Place a dial stop pin in the jaws of a needle nose pliers.

4. Insert the dial stop pin in the appropriate hole on either (or both) side(s) of the control

dial to restrict dial rotation.

MAINTENANCE

Open areas at bottom and around base of thermostat should be kept clean and free from

obstructions to allow proper flow of air. If switch contacts need cleaning, this may be done

with a contact burnishing tool.

FIELD REPAIR

These thermostats are not field repairable. Replace entire device.

Setpoint

Dial

Dial Stop Pin

Insertion Holes

Needle Nose

Pliers

Dial Stop

Figure-6 Dial Stop Pin Insertion.