Selection Guide
Table Of Contents
- 1. Determine the manufacturer, part number, size, and stroke of the competitive valve body.
- 2. Determine the type of actuator required (e.g. pneumatic, electric two-position, electric floating, electric proportional), th...
- 3. Consult the appropriate section of this selection guide to determine the required AV-8xx kit number, compatible TAC actuator part number, and TAC actuator linkage (if needed).
- Competitive Globe Valve Adapters
- AV-800 Series Application Overview
- 1. TAC actuator and adapter dimensions may need to be checked to assure proper clearances are maintained.
- 2. The replacement actuator and adapter listed represent what TAC believes are an equivalent. Actuators do not necessarily have ...
- 3. TAC assumes no responsibility for guaranteeing the acceptability of any suggested replacements. The suggestions contained herein should only be used as a guide.
- 4. Consult the valve manufacturer if the system pressures or temperatures are being changed to assure proper performance.
- 5. Pneumatic actuator close-offs are based on 20 psig to the actuator diaphragm
- 6. All specified close-offs are nominal, and can vary based on the age of the valve, tightness of the stem packing, and variations in stem drag
8 © Copyright 2009 TAC. All rights reserved. F-27470-3
Honeywell Adapter Application Reference
Recommended TAC Actuators
Refer to table below for complete actuator information. Only use the TAC actuators shown in this selection guide for
the specific valve, linkage, and actuator combination.
AV-810 — Actuator, Linkage, and Close-Off Information for Two-and Three-Way Honeywell
Valves (TAC Pneumatic and DuraDrive Spring Return Actuators)
AV-810 — Actuator, Linkage, and Close-Off Information for Two-and Three-Way Honeywell Valves (TAC
Forta Non-Spring Return Actuators)
Honeywell
Valve
Models
a
a
For three-way valves, use the lowest published close-off pressure (normally open or normally closed) for the actuator selected.
Actuator MK-2690 MK-6801 MK-6811 MK-6821 Mx51-720x
Additional Linkage AV-7800 AV-430 Included
b
b
Linkage included in actuator.
Valve Stroke 3/4” 3/4” 3/4” 3/4” 3/4” 3/4” 3/4”
Spring Range 3-7 psig 5-10 psig 7-12 psig 3-8 psig 5-10 psig 8-13 psig —
V5011
V5011F
V5011G
V5011N
V5013
V5013F
V5013G
V5013N
1/2” Normally Open 220
c
c
20 psig supply air pressure.
170
c
90
c
Not Recommended 250
3/4” Normally Open 130
c
120
c
60
c
250
c
250
c
250
c
250
1” Normally Open 70
c
50
c
25
c
250
c
250
c
250
c
200
1-1/4” Normally Open 40
c
30
c
15
c
250
c
150
c
150
c
150
1-1/2” Normally Open 29
c
20
c
9
c
250
c
230
c
160
c
100
2” Normally Open
Not Recom-
mended
Not Recom-
mended
Not Recom-
mended
160
c
120
c
90
c
65
2-1/2” Normally Open 110
c
80
c
50
c
35
3” Normally Open 70
c
60
c
40
c
25
1/2” Normally Closed
Not Recom-
mended
50 130
Not Recom-
mended
Not Recom-
mended
Not Recom-
mended
250
3/4” Normally Closed 30 60 250
1” Normally Closed 9 30 80 160 250 200
1-1/4” Normally Closed 10 15 60 120 200 150
1-1/2” Normally Closed
Not Recom-
mended
Not Recom-
mended
40 80 170 100
2” Normally Closed 20 50 90 65
2-1/2” Normally Closed 12 33 60 35
3” Normally Closed 7 22 40 25
Honeywell
Valve
Models
Actuator M400A (-VB) M800A (-VB) M1500A (-VB)
Additional
Linkage
—
a
a
No separate linkage required.
Valve Stroke 3/4”
V5011
V5011F
V5011G
V5011N
V5013
V5013F
V5013G
V5013N
1/2” 250 250
Not
Recommended
3/4” 198 250
1” 92 207
1-1/4” 56 130
1-1/2” 37 88 177
2” 19 48 98
2-1/2”
Not
Recommended
29 61
3” 19 42