Submittal Sheet

European Standard EN 55022

Note: This is a Class B digital (European Classification) product. In a domestic

environment this product may cause radio interference in which case the user may be

required to take adequate measures.

Location Caution: Avoid locations where excessive moisture, corrosive fumes, vibration, or

explosive vapors are present.

Mounting Changing Control Function (proportional units only)

These actuators are equipped with a jumper to control the function of the signal as received.

See Figure-9. Factory setting is for direct acting (actuator moves away from normal position

as signal increases). Remove cover to change jumper settings.

Direct Acting

(pins connected)

Reverse Acting

(pins open)

Note: Cover screws are #8 Torx.

Figure-9 RA/DA Jumper Setting for Proportional Models.

Figure-10 Location of Manual Override.