Submittal Sheet

F-27170-6 ¤Copyright 2010 Schneider Electric All Rights Reserved. 5
TYPICAL TWO POSITION CONTROL (wiring diagrams)
Figure-1 illustrates typical wiring diagrams for spring return two-position MA4D-x03x-xxx
actuators.
See Tables1-2 for model selection.
TYPICAL FLOATING CONTROL (wiring diagrams)
Figure-2 through Figure-5 illustrate typical wiring diagrams for floating
MF4D-xxx3-x00 actuators. See Tables 1-4 for model selection.
Caution: This product contains a half-wave rectifier power supply and must not be
powered off transformers used to power other devices utilizing non-isolated full-wave
rectifier power supplies. Refer to EN-206, Guidelines for Power Multiple Devices from a
Common Transformer, F-26363 for detailed information.
MA4D-X033-X00
1
1
24 Vac Transformer
or 20-30 Vdc
Blk
Red
Com
Hot (+DC)
Line
Volts
SPST Control Contact
N
Hot
L1
L2
120 Vac or
230 Vac
120 Vac White Black
230 Vac Blue Brown
Voltage L1 N L2 Hot
MA4D-X03X-000
SPST Control Contact
Figure-1 Typical Wiring Diagrams for Two Position Actuators.
MF4D-XXX3-X00
24 Vac Transformer
or 20-30 Vdc
Red
Black
Common
1
Hot (+DC)
Line
Volts
Blue
Drive Open
Drive Closed Yellow/Black
2
Typical
Floating
Controller
(-)
(+)
Feedback Signal
2 to 10 Vdc
Violet
7
Figure-2 Floating Point Control.