Product Overview

Wiring Connections

Wire Lead Connections (No Conduit)

Make connections as required. Refer to Figure-5.

Note:

Cover plate and screw supplied with actuator are not required with this method.

Installing 3/8" Flexible Conduit Onto One Or Both Sides Of Actuator

Flexible conduit may be installed onto one or both sides of the actuator (refer to Figure-7 and Figure-8). Install each conduit as

follows:

1. Determine the side of the actuator to which the flexible conduit is to be attached.

2. Remove the knockout, using channel lock pliers, on the selected side of the actuator. Refer to Figure-6.

Figure-4 Wiring of Multiple MP-5400 Series Actuators to Single Power Source.

To Vac Power

Black

Green

To Additional

MP-54XX Series Actuators

Green

MP-54XX

24 Vac Black/Blue

120 Vac White

240 Vac White/Black

Note: Refer to Figure-1

and Figure-2 for

Controller Wiring

Figure-5 Wire Leads Connection (No Conduit).