Product Overview

F-24788-5 © Copyright 2008 TAC All Rights Reserved. 9
Installing Conduit Box Onto Actuator
Installation of a conduit box allows for the attachment of one or more thin wall conduits to the actuator. This procedure also serves
as an optional method for connecting flexible conduit to the actuator.
1. Remove the knockout from the cover plate supplied with the actuator. Refer to Figure-9.
2. Slip the actuator’s leads through a standard 1/2” conduit bushing (Figure-10, not supplied) and the knockout hole in the cover
plate. Refer to Figure-11.
3. Seat the conduit bushing in the base.
4. Install the cover plate, using the two screws provided.
Figure-9 Cover Plate Knockout Removal.
Cover Plate
Knockout
1/8" (3 mm) maximum
Use TAC 11-1612,
Bridgeport 1102-DC,
or equivalent
Figure-10 1/2" Conduit Bushing.
Figure-11 Conduit Bushing and Cover Plate Installation.
1/2" Conduit Bushing
(not supplied)
Base
Cover Plate