User Guide
Table Of Contents
- Application
- Features
- Applicable Literature
- SPECIFICATIONS
- ACCESSORIES
- TYPICAL APPLICATIONS (wiring diagrams)
- List of Figures
- Typical Actuators: MP-361, MP-371, MP-381, MP-382, and MP-2113-500.
- Typical Actuators: MP-421, MP-422, MP-423, MP-424, MP-451, MP-452, MP-4553, MP-454, MP-465, MP-483, MP-485, MP-486, MP-495, MP-2130-500, MP-2150-500, MP5-2151-500, MP5-4651, MP5-4751, MP-4851, and MP5-4851.
- Typical Actuators: MP-361, MP-371, MP-381, MP-382, and MP-2113-500.
- Typical TAC Microtherm Controllers: PP-22x Series, TP-2xx Series, TP-3xx Series, TP-4xx Series, and TP-101x Series.
- Typical Cooling TAC Microtherm: TP-1031.
- Typical TAC Microtherm Controllers: PP-22x Series, TP-2xx Series, TP-3xx Series, TP-4xx Series, and TP-101x Series.
- Typical Actuators: MP-465, MP-475, MP-485, MP-486, MP-495, MP-2130-500, MP-2150-500, MP5-2151-500, MP5-4651, MP5-4751, MP-4851, and MP5-4851.
- Typical TAC Microtherm Controllers: PP-22x Series, TP-2xx Series, TP-3xx Series, TP-4xx Series, and TP-101x Series.
- Typical Cooling TAC Microtherm: TP-1031.
- Typical Actuators: MP-465, MP-475, MP-485, MP-486, MP-495, MP-2130-500, MP-2150-500, MP5-2151-500, MP5-4651, MP5-4751, MP-4851, and MP5-4851.
- Typical TAC Microtherm Controllers: PP-22x Series, TP-2xx Series, TP-3xx Series, TP-4xx Series, and TP-101x Series.
- Typical Actuators: MP-367, MP-377, and MP-387.
- Typical TAC Microtherm Controllers: PP-22x Series, TP-2xx Series, TP-3xx Series, TP-4xx Series, and TP-101x Series.
- Sequence of Operation
- Typical TAC Microtherm Controllers: TP-2xx Series, TP-3xx Series, and TP-4xx Series.
- Cycle of Operation
- Typical TAC Microtherm Controllers: TP-2xx Series, TP-3xx Series, and TP-4xx Series.
- Cycle of Operation
- Typical Actuators which require AE-504 purchased separately: MP-361, MP-371, MP-382, and MP-2113-500.
- Typical Actuators which require AE-504 purchased separately: MP-465, MP-475, MP-483, MP-485, MP-486, MP-495, MP-2130-500, MP-2150-500, MP5-4651, MP5-4751, MP-4851, MP5-4851.
- Typical Actuators which require CP-8301-120 purchased separately: MP-421, MP-422, MP-423, MP-424, MP-451, MP-452, MP-454.
- Typical Actuators with CP-8301-120 factory installed and wired: MP-461-600, MP-471-600, MP-481-600, MP-2110-601.
- Typical Actuators which require CP-8301-024 purchased separately: MP-361, MP-371, MP-381, MP-382, MP-2113-500.
- Typical Actuators which require CP-8301-120 purchased separately: MP-465, MP-475, MP-483, MP-485, MP-486, MP495, MP-2130-500, MP-2150-500.
- Typical Actuators which require CP-8301-240 purchased separately: MP5-2151-500, MP5-4651, MP5-4751, MP-4851, MP5-4851.
- Typical Actuators which require CP-8391-913 purchased separately: MP-361, MP-371, MP-381, MP-382, MP-2113-500.
- Typical Actuators which require CP-8391-910 purchased separately: MP-421, MP-422, MP-424, MP-451, MP-452, MP-453, MP-454.
- Typical Actuators which require CP-8391-910 purchased separately: MP-465, MP-475, MP483, MP-485, MP-486, MP-495, MP-2130-500, MP-2150-500.
- Typical Actuators which require CP-8391-716 purchased separately: MP-421, MP-422, MP-423, MP-424, MP-451, MP-452, MP-453, MP-454.
- Typical 120 Vac Actuators which require CP-8391-716 purchased separately: MP-465, MP-475. MP-483, MP-485, MP-486, MP-495, MP-2130-500, MP-2150-500.
- Typical 240 Vac Actuators which require CP-8391-716 purchased separately: MP5-2151-500, MP5-4651, MP5-4751, MP-4851, MP5-4851.
- Typical Actuators: MP-361, MP-371, MP-381, and MP-382.
- Typical Actuators: MP-421, MP-422, MP-423, MP-424, MP-451, MP-452, MP-453, MP-454, MP-461-600, MP-471-600, and MP-481-600.
- Typical Actuators: MP-465, MP-475, MP-483, MP-486, MP-495, MP5-4651, MP5-4751, MP-4851, and MP5-4851.
- Typical Actuator: MP-2113-500.
- Typical Actuator: MP-2110-600.
- Typical Actuators: MP-2130-500, MP-2150-500, MP5-2151-500.
- Typical Actuators: MP-379 and MP-389
- Typical Actuators: MP-470, MP-480, and MP-4701.
- Typical Actuators: MP-367, MP-377, and MP-387.
- List of Figures
- INSTALLATION
- MOUNTING
- WIRING
- ADJUSTMENTS
- CHECKOUT
- GO, NO GO Test
- Slidewire Controller with 24 Vac Actuators
- Slidewire Controller with Line Voltage Actuator
- CP-8301-120, Vdc Interface (TAC System 8000) with Line Voltage Actuators without Internal Transformer
- CP-8301-024, Vdc Interface (TAC System 8000) with 24 Vac Actuators
- CP-8301-120 and CP-8301-240, Vdc Interface (TAC System 8000) with Line Voltage Actuators with Internal Transformer
- CP-8391-xxx Series mAdc Interface
- Positioning the Actuator with the Controller
- GO, NO GO Test
- REPLACEMENT PARTS
- MAINTENANCE
- TROUBLESHOOTING
- REPAIR
- DIMENSIONAL DATA
4 © Copyright 2007 TAC All Rights Reserved. F-15479-8
Table-3 MP-4xx Series Model Chart.
Actuator
Part
Number
Internal
Wiring
(See
Figure)
Input Control Signal External Wiring (and required Interface Module that must be purchased
separately)
(See Figure)
Power
Requirements
Output Shaft
Aux.
Switch
Built-in
Trans-
former
b
2-Position
SPST
Spring
Return
2-Position
or
Floating
SPDT
TAC Microtherm
a
(Proportional Electric)
135 to
1,000 Ω
Slidewire
Voltage Vdc
Current
mAdc
Volts Hz. Amps
Torque
Lb.-in.
(N-m)
Timing
Seconds
(No Load)
Degrees of
Rotation
Spring
Return
Standard
Sequenc-
ing
of Two
Actuators
5-Position
(Adj. Min
Position)
MP-421 Figure-25 – Figure-6 – – – –
Figure-16
(CP-8301-120)
Figure-20
c
or
Figure-22
d
120 60 0.65 60 (6.8) 25 180 (Adj.
f
) No SPDT –
MP-422 Figure-25 – Figure-6 – – – –
Figure-16
(CP-8301-120)
Figure-20
c
or
Figure-22
d
120 60 0.65 60 (6.8)
25 to 250
(Adj.)
180 (Adj.
f
) No SPDT –
MP-423 Figure-25 – Figure-6 – – – –
Figure-16
(CP-8301-120)
Figure-20
c
or
Figure-22
d
120 60 0.65 60 (6.8) 13 90 (Adj.
f
) No SPDT –
MP-424 Figure-25 – Figure-6 – – – –
Figure-16
(CP-8301-120)
Figure-20
c
or
Figure-22
d
120 60 0.65 60 (6.8)
13 to 130
(Adj.)
90 (Adj.
f
) No SPDT –
MP-451 Figure-25 – Figure-6 – – – –
Figure-16
(CP-8301-120)
Figure-20
c
or
Figure-22
d
120 60 0.65 220 (24.9) 80 180 (Adj.
f
) No SPDT –
MP-452 Figure-25 – Figure-6 – – – –
Figure-16
(CP-8301-120)
Figure-20
c
or
Figure-22
d
120 60 0.65 220 (24.9)
80 to 800
(Adj.)
180 (Adj.
f
) No SPDT –
MP-453 Figure-25 – Figure-6 – – – –
Figure-16
(CP-8301-120)
Figure-20
c
or
Figure-22
d
120 60 0.65 220 (24.9) 40 90 (Adj.
f
) No SPDT –
MP-454 Figure-25 – Figure-6 – – – –
Figure-16
(CP-8301-120)
Figure-20
c
or
Figure-22
d
120 60 0.65 220 (24.9)
40 to 400
(Adj.)
90 (Adj.
f
) No SPDT –
MP-461-600
e
Figure-25 – 1.5 – – – – Figure-16
h
– 120 60 0.5 50 (5.6) 90 180 (Adj.
f
) CW SPDT –
MP-465 Figure-26 Figure-4 Figure-6 Figure-9 – –
Figure-15
(AE-504)
Figure-18
(CP-8301-120)
Figure-21
c
or
Figure-23
d
120 60 0.5 50 (5.6) 90 180 (Adj.
f
) CW SPDT Yes
MP-470 Figure-31 – – – – Figure-13 – – – 120 60 0.5 50 (5.6) 90 180 (non-Adj.) CCW None Yes
MP-471-600
e g
Figure-25 – – – – – – Figure-16
h
– 120 60 0.5 50 (5.6) 90 180 (non-Adj.) CCW SPDT –
MP-475 Figure-26 Figure-4 Figure-6 Figure-9 – –
Figure-15
(AE-504)
Figure-18
(CP-8301-120)
Figure-21
c
or
Figure-23
d
120 60 0.5 50 (5.6) 90 180 (non-Adj.) CCW SPDT Yes
MP-480 Figure-31 – – – – Figure-13 – – – 120 60 0.5 220 (24.9) 130 180 (Adj.
f
) No None Yes
MP-481-600
e
Figure-25 – – – – – – Figure-16
h
– 120 60 0.5 220 (24.9) 130 180 (Adj.
f
) No SPDT –
MP-483 Figure-26 – Figure-6 – – –
Figure-15
(AE-504)
Figure-18
(CP-8301-120)
Figure-21
c
or
Figure-23
d
120 60 0.5 220 (24.9) 65 90 (Adj.
f
) No SPDT Yes
MP-485 Figure-26 – Figure-6 – – –
Figure-15
(AE-504)
Figure-18
(CP-8301-120)
Figure-21
c
or
Figure-23
d
120 60 0.5 220 (24.9) 130 180 (Adj.
f
) No SPDT Yes
MP-486 Figure-26 – Figure-6 – – –
Figure-15
(AE-504)
Figure-18
(CP-8301-120)
Figure-21
c
or
Figure-23
d
120 60 0.5 220 (24.9)
130 to 1300
(Adj.)
180 (Adj.
f
) No SPDT Yes
MP-495
i
Figure-26
– Figure-6 – – –
Figure-15
(AE-504)
Figure-18
(CP-8301-120)
Figure-21
c
or
Figure-23
d
120 60 0.95 450 (50.9) 130 180 (Adj.
f
) No SPDT Yes
Footnotes for this table are listed on the following page.










