User Guide
Table Of Contents
- Application
- Features
- Applicable Literature
- SPECIFICATIONS
- ACCESSORIES
- TYPICAL APPLICATIONS (wiring diagrams)
- List of Figures
- Typical Actuators: MP-361, MP-371, MP-381, MP-382, and MP-2113-500.
- Typical Actuators: MP-421, MP-422, MP-423, MP-424, MP-451, MP-452, MP-4553, MP-454, MP-465, MP-483, MP-485, MP-486, MP-495, MP-2130-500, MP-2150-500, MP5-2151-500, MP5-4651, MP5-4751, MP-4851, and MP5-4851.
- Typical Actuators: MP-361, MP-371, MP-381, MP-382, and MP-2113-500.
- Typical TAC Microtherm Controllers: PP-22x Series, TP-2xx Series, TP-3xx Series, TP-4xx Series, and TP-101x Series.
- Typical Cooling TAC Microtherm: TP-1031.
- Typical TAC Microtherm Controllers: PP-22x Series, TP-2xx Series, TP-3xx Series, TP-4xx Series, and TP-101x Series.
- Typical Actuators: MP-465, MP-475, MP-485, MP-486, MP-495, MP-2130-500, MP-2150-500, MP5-2151-500, MP5-4651, MP5-4751, MP-4851, and MP5-4851.
- Typical TAC Microtherm Controllers: PP-22x Series, TP-2xx Series, TP-3xx Series, TP-4xx Series, and TP-101x Series.
- Typical Cooling TAC Microtherm: TP-1031.
- Typical Actuators: MP-465, MP-475, MP-485, MP-486, MP-495, MP-2130-500, MP-2150-500, MP5-2151-500, MP5-4651, MP5-4751, MP-4851, and MP5-4851.
- Typical TAC Microtherm Controllers: PP-22x Series, TP-2xx Series, TP-3xx Series, TP-4xx Series, and TP-101x Series.
- Typical Actuators: MP-367, MP-377, and MP-387.
- Typical TAC Microtherm Controllers: PP-22x Series, TP-2xx Series, TP-3xx Series, TP-4xx Series, and TP-101x Series.
- Sequence of Operation
- Typical TAC Microtherm Controllers: TP-2xx Series, TP-3xx Series, and TP-4xx Series.
- Cycle of Operation
- Typical TAC Microtherm Controllers: TP-2xx Series, TP-3xx Series, and TP-4xx Series.
- Cycle of Operation
- Typical Actuators which require AE-504 purchased separately: MP-361, MP-371, MP-382, and MP-2113-500.
- Typical Actuators which require AE-504 purchased separately: MP-465, MP-475, MP-483, MP-485, MP-486, MP-495, MP-2130-500, MP-2150-500, MP5-4651, MP5-4751, MP-4851, MP5-4851.
- Typical Actuators which require CP-8301-120 purchased separately: MP-421, MP-422, MP-423, MP-424, MP-451, MP-452, MP-454.
- Typical Actuators with CP-8301-120 factory installed and wired: MP-461-600, MP-471-600, MP-481-600, MP-2110-601.
- Typical Actuators which require CP-8301-024 purchased separately: MP-361, MP-371, MP-381, MP-382, MP-2113-500.
- Typical Actuators which require CP-8301-120 purchased separately: MP-465, MP-475, MP-483, MP-485, MP-486, MP495, MP-2130-500, MP-2150-500.
- Typical Actuators which require CP-8301-240 purchased separately: MP5-2151-500, MP5-4651, MP5-4751, MP-4851, MP5-4851.
- Typical Actuators which require CP-8391-913 purchased separately: MP-361, MP-371, MP-381, MP-382, MP-2113-500.
- Typical Actuators which require CP-8391-910 purchased separately: MP-421, MP-422, MP-424, MP-451, MP-452, MP-453, MP-454.
- Typical Actuators which require CP-8391-910 purchased separately: MP-465, MP-475, MP483, MP-485, MP-486, MP-495, MP-2130-500, MP-2150-500.
- Typical Actuators which require CP-8391-716 purchased separately: MP-421, MP-422, MP-423, MP-424, MP-451, MP-452, MP-453, MP-454.
- Typical 120 Vac Actuators which require CP-8391-716 purchased separately: MP-465, MP-475. MP-483, MP-485, MP-486, MP-495, MP-2130-500, MP-2150-500.
- Typical 240 Vac Actuators which require CP-8391-716 purchased separately: MP5-2151-500, MP5-4651, MP5-4751, MP-4851, MP5-4851.
- Typical Actuators: MP-361, MP-371, MP-381, and MP-382.
- Typical Actuators: MP-421, MP-422, MP-423, MP-424, MP-451, MP-452, MP-453, MP-454, MP-461-600, MP-471-600, and MP-481-600.
- Typical Actuators: MP-465, MP-475, MP-483, MP-486, MP-495, MP5-4651, MP5-4751, MP-4851, and MP5-4851.
- Typical Actuator: MP-2113-500.
- Typical Actuator: MP-2110-600.
- Typical Actuators: MP-2130-500, MP-2150-500, MP5-2151-500.
- Typical Actuators: MP-379 and MP-389
- Typical Actuators: MP-470, MP-480, and MP-4701.
- Typical Actuators: MP-367, MP-377, and MP-387.
- List of Figures
- INSTALLATION
- MOUNTING
- WIRING
- ADJUSTMENTS
- CHECKOUT
- GO, NO GO Test
- Slidewire Controller with 24 Vac Actuators
- Slidewire Controller with Line Voltage Actuator
- CP-8301-120, Vdc Interface (TAC System 8000) with Line Voltage Actuators without Internal Transformer
- CP-8301-024, Vdc Interface (TAC System 8000) with 24 Vac Actuators
- CP-8301-120 and CP-8301-240, Vdc Interface (TAC System 8000) with Line Voltage Actuators with Internal Transformer
- CP-8391-xxx Series mAdc Interface
- Positioning the Actuator with the Controller
- GO, NO GO Test
- REPLACEMENT PARTS
- MAINTENANCE
- TROUBLESHOOTING
- REPAIR
- DIMENSIONAL DATA
34 © Copyright 2007 TAC All Rights Reserved. F-15479-8
Power Wiring All actuators include a barrier that separates the power wiring compartment from the low
voltage wiring compartment. Refer to Table-9 for allowable circuit class for the two wiring
compartments.
Table-9 Actuator Circuit Class.
Refer to Table-10 for selection of proper gage wire for the length of wire run (one run has
two wires).
Table-10 Power Wire Selection.
When multiple 24 Vac actuators are powered from the same transformer, the actuators must
be in phase. Connect the same transformer lead to the “G” terminal on all actuators and
same transformer lead to the “H” terminal on all actuators.
Typical Part Numbers
Actuator
Description
Power Wiring Compartment Low Voltage Wiring Compartment
Terminals (Function)
Circuit Class for
Power Wiring Compartment
Terminals (Function)
Circuit Class
for Low
Voltage Wiring
Compartment
MP-361, MP-371,
MP-381, MP-382,
MP-2113-500
Low Voltage
Proportional
H&G (24 Vac Power)
1, 5, and 6
(Auxiliary Switch)
1.May be Class 2 circuit if
auxiliary switch is wired to
24
Vac or is not used.
2.Must be Class 1 circuit if
auxiliary switch is wired to line
voltage.
X, 2, and 3
(Control Circuit)
4, 7, and 8
(Potentiometer)
May be Class 2
Circuit.
MP-421, MP-422,
MP-423, MP-424,
MP-451, MP-452,
MP-453, MP-454,
MP-461-600, MP-465,
MP-471-600, MP-475,
MP-481-600, MP-483,
MP-485, MP-486,
MP-495, MP-2150-500,
MP5-4651, MP5-4751,
MP-4851, MP5-4851
Line Voltage
Proportional
L1 and L2
(Line Voltage Power)
1, 5, and 6
(Auxiliary Switch)
Must be Class 1 circuit.
X, 2, and 3
(Control Circuit)
4, 7, and 8
(Potentiometer)
May be Class 2
Circuit.
MP-367, MP-377,
MP-387
Low Voltage
Sequencing
H&G (24 Vac Power)
1, 5, and 6
(Control Switches)
May be Class 2 Circuit.
X, 2, and 3
(Control Circuit)
4, 7, and 8
(Potentiometer)
May be Class 2
Circuit.
MP-379, MP-389
Low Voltage
Five-Position
H&G (24 Vac Power)
6, 7, and 8
(Potentiometer)
May be Class 2 Circuit.
X, 1, 2, 3, 4, 5
(Control Circuit)
May be Class 2
Circuit.
MP-470, MP-480,
MP-4701
Line Voltage
Five-Position
H&G (24 Vac Power)
6, 7, and 8
(Potentiometer)
Must be Class 1 Circuit.
X, 1, 2, 3, 4, 5
(Control Circuit)
May be Class 2
Circuit.
Actuator Series Voltage
Wire Size
(AWG)
Maximum
Run ft. (m)
MP-36x, MP-37x 24 Vac
14
12
10
115 (35)
180 (55)
285 (87)
MP-38x 24 Vac
14
12
10
130 (40)
205 (62)
325 (99)
MP-42x
MP-445-304
MP-45x
120 Vac
14
12
10
810 (247)
1275 (388)
2040 (622)
MP-46x
MP-47x
MP-48x
120 Vac
14
12
10
1050 (320)
1660 (506)
2650 (808)
MP-4xx1 240 Vac 14 3340 (1018)










