User Guide

ManualsBrandsBarber Colman ManualsDampers24V Forta NSR Globe Valve Actuator 90 lbf Torque w/ 2 SPDT Auxiliary Switches

Schneider Electric 1354 Cliffo rd Ave. Loves Park, IL 61111 1-888 - 44 4 -1311 w ww.schneider-electric.co m / buildings

F-27599-4 March 2011 co

Globe Valve Actuators & Assemblies

Forta

Connection Part Number VB-7000 1/2 “ to 2” Bronze

Direct Mounted

VB-7000 1/2” to 2” Bronze Re-

quires AV-821 Linkage

Purchased separately

VB-8000 2-1/2” to 6” Iron

Requires AV-822 Linkage

Purchased separately

VB-9313 2-1/2” to 6” 3 way

mixing Iron Requires AV-822

Linkage Purchased seperately

Screw-Mount M400A-VB

Yes

———

M400A-S2-VB

M800A-VB

M800A-S2-VB

M1500A-VB

M1500A-S2-VB

U-Bolt Mount M400A

—Yes

—

M400A-S2

M800A

2 1/2 to 4” only

M800A-S2

M1500A

Yes Yes

M1500A-S2

a. M1500A actuators should not be used on VB-7323 Three Way Diverting Valves

GLOBE VALVE/FORTA COMPATIBILITY

The switches on the circuit board should be set before the actuator is installed. There are no other switches or potentiometers that should be

set or adjusted. Actuator travel adjustment must be set as follows upon commissioning: Actuator and valve linked, manual override lever raised

(AUTO), power on, move switch 9 (OP/ADJ) ON and then OFF. Forta closes the valve and opens it fully. The adjustment is  nished by the actua-

tor closing the valve again; the electronic circuitry then adjusts the stroke. It also scales the actuator input signal, output feedback signal, and

optional auxiliary switch outputs to match the valve’s travel. The set values are stored in the EEPROM of the actuator so that they will remain after

a loss of voltage. When the end position adjustment is complete, the actuator starts to control the valve according to the control signal.

Note: Switch 9 (OP/ADJ) must be in the o position for normal operation.

ELECTRICAL CONNECTIONS

ACCESSORIES

U-Bolt Mounting Style Only (M400A, M800A, M1500A Only):

AV-821 VB-7xxx series globe valve linkage kit required for M400A, M800A, and M1500A actuator mounting. Order separately, F-27701.

AV-822 Globe valve linkage kit required for mounting M800A actuators to 2-1/2 to 4 inch VB-9313 and the M1500A actuators to either the 2-1/2”

to 6” VB-9313 series globe valves and the 2-1/2” to 6” VB-8000 series globe valves. Order separately, F-27702.

U-Bolt or Screw Mount Styles (M400A (VB)/M800A (VB)/M1500A (VB) Styles):

AV-800 series globe valve adapters (competitor valves). F-27470