Brochure

F-27855-1098
5. VB-8/9000 Globe Valves
Sizing and Selection
Assembly Ordering
VB-8/9000
Control
Signal
1
)
Trim and Valve
Configuration
2
)
–
Pipe End
Connections
3
3
)
–
Actuator or
Linkage
4
)
Pattern
Code
5
5
)
––
Port Code
Cv Value
6
)
Specifying the Available Four Part Number Fields
(1, 2, 4 and 6 below) to Determine the Part Number of a Selected Valve/Actuator
Assembly
Refer to the
guide below.
Refer to the
guide below.
Specify Option 3
(Flanged) for all
valves.
Refer to the
following pages
for Spring &
Non-Spring
Return Electric
and Pneumatic
Spring Return
Actuator Codes,
part numbers
and Linkage part
numbers based on
required close-off
pressure.
Specify
Option 5
(Flanged)
for all
valves.
For water, steam,
glycol and similar
non flammable,
non toxic fluids,
choose based on
the Capacity Sizing
section of this
catalog. Below 2½”,
go to the VB-7000
sections of this
catalog.
V
Assembly Ordering VB-8000/VB-9000
4 = AK-42309-500




8
(Bottom port is “Common”)

(One end port is “Common”)
Pipe Connection End Fitting
3 = Flanged
3
V
– – – –
5
A = Two Position

F = Floating
S = Proportional
K = Pneumatic 0-30
Psi
Connection
5 = Flanged
Port Code
2½”…6” (Cv 56 to 500)
12 = 2½”
13 = 3”
14 = 4”
15 = 5”
16 = 6”
NOTE: Threaded bodies are not available in size 2½” and larger.
Actuator or Linkage Code

xxx = Replace with actuator code.
Place the appropriate control signal
code in the second digit and replace
xxx with the desired actuator code.
Note: Use one zero (0) when ordering

when ordering with actuator or link-

5. VB-8/9000 Globe Valves
Sizing and Selection