Brochure

F-27855-1084
4. VB-7000 Globe Valves
Actuators & Linkages
Application
These MP-52xx Series actuators provide electronic proportional control of valves
requiring the return to normal position upon power interruption.
Features
• Compatibility with 2…15 Vdc System 8000 input signals.
• Proportional control by variable Vdc input signal.
• Spring return
• Fixed 3 Vdc operating span.
• Non-adjustable start point and non-positive positioning. Typically, one actuator is
controlled from one Vdc output signal.
• 10,000 Ω or greater input impedance.
• 24 and 120 Vac models.
• Die cast lower housing with ½" (12.7 mm) conduit opening
and painted steel upper housing.
• Hydraulic actuator with oil-immersed motor, transducer, and pump.
Model Table
Part Number
Actuator Power Input
10 Amps
Auxiliary
Switch
a
Timing in Seconds
@ 72° F (22° C)
Required
Linkage
AC
Voltage
± 10%
60 Hz 50 Hz
To Extend
(No Load
Stroke)
To
Retract
Retract
on
Power
Loss
Watts Amps Watts Amps
MP-5210
120 11.7 0.16 12.9 0.19
No
60 40 15
AV-7600-1
AV-601
b
MP-5210-500
Yes
MP-5213
24 12.0 0.80 13.2 0.97
No
MP-5213-500
Yes
a - Common of switch is in series with AC power supply to the motor. Therefore, the switch must be wired to control the same
voltage as the actuator itself.
b - May be required for steam or hot water.
MP-52xx Electronic Hydraulic
Proportional SR Actuators
MP-52xx Proportional
Specifications
Inputs
Compatible with



Power Input
Refer to Model Table.
Connections
Color-coded 4 ft. (1.2 m) leads.
Outputs
Electrical

close the N.C. contact at the retracted end of stroke.
Mechanical

extended).
Environment
Temperature Limits
Shipping & Storage, -40…140° F (-40…61° C)
For valve actuators: Refer to Pg. 29, 2. VB-7000 Series ½"…2" Globe Valves
Humidity
5…95% RH, non-condensing
Location

Dimensions
6¾ x 3¼ Dia." (171 x 83 mm)
Regulatory
Compliance
RoHS and REACh
4. VB-7000 Series Globe Valves
Actuators & Linkages