Brochure

247F-27855-10
Guide Specification Text
F-27990-4 tc 5
© 2019 Schneider Electric. All rights reserved. All trademarks are owned by Schneider Electric Industries SAS or its
affiliated companies.
10. Wiring (depending on model) Removable Terminal Block, 10 ft. (3.05 m) Plenum
Cable, 18 in. (45 cm) Appliance Wire
11. Locations must be rated NEMA 2, IEC IP31. (Indoor Use Only.) Actuators with
terminal block or plenum cable leads are plenum rated per UL file number E9429.
12. Agency Listings: ISO 9001, cULus, and CE.
13. Schneider Electric shall warrant all components for a period of 5 years from the date
of production.
C. 2-way (½”…3”) and 3-way (½”…2”) Ball Valve Actuators
[Schneider Electric VB-2000 ball valves actuators]
1. Manufactured, brand labeled or distributed by Schneider Electric.
2. Size for torque required for valve close-off pressure for system design.
3. Actuators are to be available in spring return (SR) and non-spring return (NSR)
models. Spring Return (SR) actuators are to provide a choice to return direction.
4. Actuators are to be available in models for two-position, floating and proportional
control.
5. All actuator models are to be equipped with pigtail leads
6. Actuators must be available in models with manual override.
7. Actuators must be available in models with auxiliary switch(es).
8. Operating temperatures’ Floating Non-Spring Return (NSR) with 33 lb.-in. of torque
must be -25 to 130 °F (-32 to 55°C). All other actuators are to -22 to 140 °F (-30 to
60 °C)
9. Actuators must be NEMA 2 rated.
10. All actuators are to have a five-year warranty.
11. Agency Listings: ISO 9001, cULus, and CE.
D. Zone Valve Actuators-Two-position Spring Return (SR)
[Schneider Electric Erie Zone Valve PopTop
TM
Two-position valve actuators]
1. Manufactured, brand labeled or distributed by Schneider Electric.
2. Valves are to be two-position (On-Off), spring return (SR) with general or High Close
Off models.
3. Actuator Voltage Models are 24 Vac @ 50/60 Hz, 110 Vac @ 50 Hz and 120 Vac @
60 Hz, 230 Vac @ 50 Hz, 240 Vac @ 60 Hz, 208 Vac @ 50/60 Hz., 277 Vac
@50/60 Hz.
4. End (auxiliary) Switch, 24 -240 Vac Models: 24…250 Vac/101 mA min. to 5 A max.
and 9…30 Vdc @ 100 mA max. 277 Vac.
5. Actuators are to have manual override on normally closed (NC) models and
assembles to valves without the use of tools, linkages or calibration.
6. Actuators are to have a hysteresis synchronous motor.
7. North America Agency Listings: UL873: Underwriters laboratories (Category
Temperature Indicating and Regulating Equipment). CUL: UL Listed for use in
Canada by Underwriters Laboratory. Canadian Standards C22.2 No. 24.
Guide Specification Text
Pg. 5