Brochure

241F-27855-10
MP500C NSR, MP500C-SRU/
SRD Multi-Signal Actuators
MP500C SRU/SRD
11. Pressure Independent
Balancing and Control Valves
and Actuators
schneider-electric.com | 1Specification Sheet
MP500C,
500C-SRU/SRD
Multi-Signal Non-Spring/Spring Return
Actuators for VP220x SmartX PIBCV,
DN40…100 (1½…4”)
© 2016 Schneider Electric. All rights reserved. All trademarks are owned by Schneider Electric Industries SAS or its affiliated companies. April, 2018 tc
Document Number: F-27945-1
www.schneider-electric.com
Product Description
MP500C are linear electro-mechanical actuators for use with
VP220x SmartX PIBCV valves, DN40…100, controlled by
either an increase/decrease floating signal or by a range of
modulating control signals in the range 0…10V. SRU/SRD
models have a spring return feature. The U-Bolt connection
allows quick and easy direct mounting onto the SmartX PIBCV
VP220 valves.
Specifications
MP500C
MP500C-SRU
MP500C-SRD
Non-Spring Return
Stem up (retract)
Stem down (extend)
Voltage supply 24 Vac ±20% 50-60Hz
24 Vdc ±20%
Power consumption
MP500C-SRU/SRD: Running
Rest
MP500C
30 VA (21 W)
7 W
average 15 VA
Running Time
Modulating
Increase/decrease
MP500C-SRU/SRD Spring Return:
15 sec.
60/300 sec. (selectable)
13 sec.
Transformer Sizing 50 VA
Stroke
2…35 mm
Force, nominal 500 N
Duty cycle 20%/60 minutes (full load,
high amb. temp.) 80%/60 min.
(half load, room temp.)
Analog input Voltage range
(selectable) 0…10, 2…10, 0…5, 2…6,
5…10, 6…10 Vdc
Impedance Min. 100 k Ohm
Digital inputs
Voltage across open input
Current through closed input
Pulse time
24 Vac
5 mA
min. 20 ms
Position Feedback
MP500C
MP500C SRU/SRD
2…10 Vdc
2-10 Vdc or 0-5 Vdc (0-100%)
- Load 2 mA
Environmental
Operation Temperature
Storage Temperature
Ambient Humidity
14…122°F (-10…50 °C)
-13…149°F (-25…65 °C)
max 90% RH
(non-condensing)
Enclosure rating IP54 (NEMA 2)
Sound power level
MP500-SRU/SRD
MP500C
43 dba
32 dba
Standards
Heat
Humidity
Cold
Vibration
IEC-68-2-2
IEC-68-2-3
IEC-68-2-1
IEC-68-2-6
Material
Housing
Max cable core diameter
Cover
MP500C SRU/SRD
MP500C
Aluminum
2.5 mm²
Aluminum
ABS/PC plastic
S2 Auxillary Switch Relay (optional
accessory)
SPDT, 24 Vac 4A AC1:
contacts made at
1) 5% and
2) 95% of end stroke
Weight
MP500C-SRU/SRD:
MP500C
2.8 Kg (6.17 lbs)
1.8 Kg (3.96 lbs)
Part Numbers & Accessories
Part Number Description On Power Loss
MP500C
Non-Spring Return Actuator
-
MP500C-SRU Spring return stem up Valve Open
MP500C-SRD Spring return stem down Valve Closed
880-0104-000 S2 auxiliary end point switches -
Features
• Brushless DC motor.
• High resolution control board allows precise fluid control.
• Working range and end point switches adjusted automatically
to the stroke of the valve.
• When driven electrically, firmware calibrates a consistent
running time regardless of the valve stroke.
• During power loss SRU/SRD spring return drives the motor,
generating power to the board, controlling braking speed
which avoids mechanical stress and system water hammer.
• Actuators can be configured for either 3 point increase/
decrease signal or various modulating control signals
including sequencing.
• Stroke Indicators on the yoke provide clear visual indication
of the valve opening/stroke status.
MP500C-SRU/SRD MP500C
Regulatory Compliance: c-UL-us LISTED mark compliance per
UL 60730-1 & -2-14 and CAN/CSA E60730-1 & -2-14.
CE mark compliance per directives [2014/35/EU] LVD,
[2014/30/EU] EMC, and [2011/65/EU] RoHS2.
RCM mark compliance for Australia/New Zealand community.
11. Pressure Independent Balancing
and Control Valves and Actuators