Brochure

231F-27855-10
Table 13. Specification Flange Version, 2½"…4"
1) Factory setting of the valve is done at Qnom (100%) or lower depending on flow rate ordered.
2) Regardless of the setting, the valve can modulate below 1% of set flow.
3) ∆p = (P1–P3) min~max
4) 87 psi ∆p is possible if consideration has been made to the flow velocity, cavitation and noise. for
application usage please speak with Product Support
Pc - Pressure controller
Cv - Control valve
Table 14. Specification Flange Version, 5"…10"
Valve Size 5" 6" 8" 10"
Part Number VP220A-125S VP220A-125H VP220A-150S VP220A-150H VP222A-200S VP222A-200H VP222A-250S VP222A-250H
Flow
range
Q
min
gal /
min
158 194 256 332 352 475 528 652
Q
nom
(100%)
1)
395 485 640 830 880 1188 1320 1630
Setting range
2)
% 40-110%
Diff.
pressure
3)
∆p Q
nom
psi
[kPa]
5.8-58
[40-400]
8.7-58
[60-400]
5.8-58
[40-400]
8.7-58
[60-400]
5.8-58
[40-400]
8.7-58
[60-400]
5.8-58
[40-400]
8.7-58
[60-400]
Leakage acc. to standard IEC
60534
Class 4, max.
0.01% of Q
nom
Max. close off differential
pressure across the valve
232 psi (16 bar)
Connection
flange ANSI Class 125 EN 1092
actuators MP2000-NSR, MP2000-SRU, MP2000-SRD MP4000
Flow medium
Water and water mixture for closed heating and cooling systems according to plant type I for DIN EN 14868. When used in plant Type II for DIN EN
14868 appropriate protective
measures are taken. The requirements of VDI 2035, part 1 + 2 are observed.
Body Pressure Rating psi Class 125 per ASME B16.1-2010 Material Class B per ASTM A 126-04 (2014), 200 psi to 150°F, 190 psi to 200°F, 180 psi to 225°F, 175 psi to 250°F
Control range Acc. to standard IEC 60534 control range is high as flow characteristic is linear.
Control valve’s characteristic Stem up open, Linear (could be converted by actuator to equal percentage)
Medium temperature °F
(°C)
(water/glycol) 15…250 (−10 ... +120)
Stroke (Q
nom
) in.
(mm)
1.18 (30)
Materials in the water/glycol
Valve bodies Grey iron EN-GJL-250 (GG 25)
Membranes/ Bellow / O-Rings W.Nr.1.4571 EPDM
Springs Stainless Steel, W.Nr.1.4401 Stainless Steel, W.Nr.1.4310
Cone (Pc) / Cone (Cv) Stainless Steel, W.Nr.1.4404NC Stainless Steel, W.Nr.1.4021
Flat gasket Graphite gasket Non asbestos
Seat (Pc) / Seat (Cv) Stainless Steel, W.Nr.1.4027
Screw Stainless Steel, W.Nr.1.1181
Valve Size 2½" 3" 4"
Part Number VP220A-65S VP220A-80S VP220A-100S
Flow range Q
min
gal/min
34 48 66
Q
nom
(100%)
1)
85 120 165
Setting range
2)
%
40-100%
Diff. pressure
3), 4)
∆p Q
nom
psi [kPa] 4.35-58 [30-400]
Body Pressure Rating psi
Class 125 per ASME B16.1-2010 Material Class B per ASTM A 126-04 (2014),
200 psi to 150°F, 190 psi to 200°F, 180 psi to 225°F, 175 psi to 250°F
Control valve’s characteristic Stem up open, Linear (can be converted by actuator to equal percentage)
Leakage acc. to standard IEC 60534 Max. 0.05% of Q
nom
Max. close off differential
pressure across the valve
232 psi (16 bar)
For shut off function
Acc. to ISO 5208 class A - no visible leakage
Flow medium
Water and water mixture for closed heating and cooling systems according to plant type I for DIN EN 14868. When used in plant Type II for
DIN EN 14868 appropriate protective
measures are taken. The requirements of VDI 2035, part 1 + 2 are observed.
Medium temperature
°F (°C)
(water/glycol) 15…250 (−10 ... +120)
Stroke
Q
nom
in. (mm)
.59 (15)
Connection
flange ANSI Class 125
actuators MP500C, MP500C-SRU, MP500C-SRD
Materials in the water/glycol
Valve bodies Grey iron EN-GJL-250(GG25)
Membranes / Bellow / O-rings EPDM
Springs Stainless Steel, W.Nr. 1.4568, W.Nr. 1.4310
Cone (Pc) Wrought copper, CuZn40Pb3 - CW 614N, Stainless Steel, W.Nr. 1.4305
Seat (Pc) / Seat (Cv) W.Nr. 1.4305
Cone (Cv) CuZn40Pb3 - CW 614N
Screw Stainless Steel (A2)
Flat gasket NBR
schneider-electric.com | 231
Selection Guide
© 2019 Schneider Electric. All rights reserved. All trademarks are owned by Schneider Electric Industries SAS or its affiliated companies. March, 2019 tc
Document Number: F-27947-7
PIBCV Specifications: 2½…10"
Flange Version
11. Pressure Independent
Balancing and Control Valves
and Actuators
11. Pressure Independent Balancing
and Control Valves and Actuators