Brochure

229F-27855-10
Table 9. Valve Assembly 8” and 10” With PT Ports
Table 10. Specification 8” and 10” Valve Body Actuators
Table 11. Application: Operation of PIBCV Valve Body Without Actuator
Operation of the PIBCV valve body without an actuator for an automatic flow limiting balancing application.
Flow Rate
(GPM)
* Valve Size
(inch)
24 Vac Proportional with Position Output Signal
(MP4000)
880 (min. 352) 8 VP222A-200S-880-U181
1188 (min. 475) 8 VP222A-200H-1188-U181
1320 (min. 528) 10 VP222A-250S-1320-U181
1630 (min. 652) 10 VP222A-250H-1630-U181
* Factory set. Complete flow ranges are shown in tables for 8" and 10" on page
231 and page 238.
8" and 10" Valve Body Actuator Part Number (actuator code) MP4000 (U181)
Input Signal Proportional, 0…10 Vdc, 2…10 Vdc, 0…20 mA, 4…20 mA, with selectable input signal action and Floating, DIP swtich selectable
Electrical Connection Screw terminal with conduit connector
Position Feedback Output Signal 0…10 Vdc, 2…10 Vdc, 0…20 mA, 4…20 mA
a
Spring Return –
Auxilary Switch Yes
Other Features Auto calibration, LED indication, powered manual override, adjustable speed
Linear/Equal% Valve Flow Curve Selection Ye s
Actuator Speed s/mm 60Hz (50 Hz) 3 or 6 (3 or 6)
Power Consumption 15 VA
Operating Temperature Limits °F (°C) 32…131 (0…55)
Actuator Weight (lb.) 16.53
Regulatory Compliance cULus according to UL 60730-1A/-2-14 and CAN/CSA E60730-1/-2-14 and CE according to EN 60730-1/-2-14 per EMC [2014/30/
EU] and LVD [2014/35/EU]
Specification Data Sheet F-27971
Installation Data sheet F-27958
a. When used with a proportional input signal.
All actuators are 24 Vac. 50/60 HZ with conduit connector holes and wiring terminal block, manual override.
PIBCV Valve
Size
Valve Body Series Valve Stem Lock Part Number Recommended Installation and Valve Shut Off Capability
1/2”…1-1/4”
VP228E-xxxxxxx, VP229E-
xxxxxxx
Use black cap provided with VP228E-xxxxxxx or
VP229E-xxxxxxx valve body
Install valve in the supply water pipe for best shutoff valve performance. To shutoff
valve tighten black cap (max. close off pressure is 14.5 psi). To shut off against a
higher differential pressure set the valve flow to 0%.
1-1/2”, 2” VP220E-xxxxx
9114070000 (not included with valve body)
Install valve in either the supply or return water pipe. To shutoff valve tighten bottom
knob (max. close off pressure is 232 psi)
2-1/2”…4” VP220A-xxxxx
Install valve in either the supply or return water pipe. To shutoff valve tighten bottom
insert with a 8 mm allen wrench (max. close off pressure is 232 psi)
5”…6” VP221A-xxxxxx 9114071000 (not included with valve body)
No shut off knob, set the valve to a 0% flow setting to shutoff flow
8”…10” VP222A-xxxxx 9114072000 (not included with valve body)
The 9114070000, 9114071000, and 9114072000 Valve Stem Locks are secured to the valve body with a 10 mm allen wrench.
See Table 15. Assembly Valve Body Configurations on page 232 for a listing of all PIBCV valve body part numbers.
600
340
385 529
DN200
schneider-electric.com | 229
Selection Guide
© 2019 Schneider Electric. All rights reserved. All trademarks are owned by Schneider Electric Industries SAS or its affiliated companies. March, 2019 tc
Document Number: F-27947-7
PIBCV Assemblies: 8 and 10"
with PT Ports & Flanges
11. Pressure Independent
Balancing and Control Valves
and Actuators
11. Pressure Independent Balancing
and Control Valves and Actuators