User Guide

Mounting

Locate the instrument to avoid dust or oil accumulations and moisture. If installed outdoors,

the CP-8X91-456 must be protected from moisture and kept within ambient temperature

limits. Upright mounting of the CP-8391-456 is preferred, but other positions are acceptable.

(See Figure-6.) See Figure-7 for panel mounting of CP-8191-456.

CP-8391-456: Mount the CP-8391-456 to either side of the actuator by inserting the two

conduit connectors into the 1/2" knockouts on the actuator. Secure the drive with the two (2)

locknuts provided. (See Figure-6 and Figure-7.)

CP-8191-456: Panel mount the drive using the four (4) mounting holes provided.

(See Figure-7 for mounting holes.)

Figure-6 Typical Mounting for CP-8391-456.

Figure-7 Panel Mounting for CP-8191-456.