Product Overview

ManualsBrandsBarber Colman ManualsActuator AccessoriesWeather Shield for DuraDrive Actuators

F-26744

• MS40-634X TAC DuraDrive Series Non-Spring Return Direct Coupled Actuator

General Instructions, F-26745

• MS40-6083, MF40-6153 TAC DuraDrive Series Non-Spring Return Direct

Coupled Actuator General Instructions, F-26747

• MS40-717X TAC DuraDrive Series Spring Return Direct Coupled Actuator

General Instructions, F-26748

• MF40-7173 TAC DuraDrive Series Spring Return Direct Coupled Actuator

General Instructions, F-26749

SPECIFICATIONS

Material:

AM-674, 16 GA Galvanized Steel

AM-675, 12 GA Galvanized Steel

AM-714, Smoke-tinted Polycarbonate

INSTALLATION

Inspection

Inspect the package for damage. If damaged, notify the appropriate carrier immediately.

If undamaged, open the package and inspect the device for obvious damage.

Return damaged products.

Requirements

• Tools (not provided):

— Appropriate screwdriver for the mounting screws used on the weather shield and the

base mounting plate

• Training: Installer must be a qualified, experienced technician.

• #8 sheet metal screws (not provided)

• No. 24 drill bit for #8 sheet metal screws

• Other accessories as appropriate

• Wiring diagrams for the applicable hardware

Mounting

Mount the weather shield and base mounting plate onto the damper actuator as follows:

1. The weather shield must be mounted onto a flat, rigid surface that is at least as large as

the base of the weather shield. If the actuator mounting surface does not meet this

requirement, mount the optional AM-675 base mounting plate before mounting the

damper actuator and weather shield, as follows:

Table-1 Model Chart.

Model Description For Use With

AM-674 Weather Shield

MA40-704X, MF40-7043, MS40-7043,

MA4X-707X, MF4X-7073, MS4X-7073,

MA4X-715X, MF4X-7153, MS4X-7153,

MA40-717X, MF40-7173, MS40-7173,

MF40-6083, MS40-6083, MF40-6153,

MS40-6153, MF40-6343, MS40-634X

AM-675 Base Mounting Plate AM-674, AM-714

AM-714 Weather Shield*

*The MX40-6XXX actuators cannot use the AM-714 weather shield when an auxiliary

switch is mounted to the actuator.

MA40-704X, MF40-7043, MS40-7043,

MA4X-707X, MF4X-7073, MS4X-7073,

MA4X-715X, MF4X-7153, MS4X-7153,

MF40-6083, MS40-6083, MF40-6153,

MS40-6153