User Manual

4.2.3 Set the day and time
1. Push the up and down buttons at the same time. The day flashes in the display.
2. Use the up and down buttons select the day of the week (1 for Monday, 2 for
Tuesday etc.).
3. Push the up and down buttons at the same time. The hour flashes in the display.
4. Use the up and down buttons to select the hour.
5. Push the up and down buttons at the same time. The minutes flash in the display.
6. Use the up and down buttons to select the minutes.
7. Push the up and down buttons at the same time to store the day and time settings.
4.3 Operate the appliance
4.3.1 Operate the appliance with the remote control
Table 1: Start and stop the appliance
Action Preconditions Steps Result
Start the appliance
with one-button opera-
tion
The remote control is
set to the one-button
operation. Refer to
section 4.2.1 .
Push
• You hear a short
beep.
• You can use the re-
mote control when
the main screen
shows
Start the appliance
with two-button opera-
tion
The remote control is
set to the two-button
operation. Refer to
section 4.2.1 .
Push
and
at the same time
Start the appliance
from stand-by mode
The appliance is set to
stand-by mode.
Push and hold
Stop the appliance
Push
Operation
Gas Fire Panorama 70-70 15