Owner`s manual

TROUBLESHOOTING

ISSUE: The cleaner is not properly adhering to the bottom of the pool.

SOLUTION: Repeat the instructions noted in “Submerging the Cleaner” section of

the manual to release trapped air.

ISSUE: The cleaner will not climb the walls.

SOLUTION: •Ensurethefilterelementisnotfullorcloggedup.

If it is, simply clean it.

 • Althoughthewaterseemsclear,yourpoolmaycontainmicroscopic

algae (not visible to the naked eye), which are making the sides

slippery and are preventing the cleaner from climbing them. In this

case, super chlorinate the pool and adjust the pH level.

Do not leave the cleaner in the pool during super chlorination.

ISSUE: The cleaner is not moving at all.

SOLUTION:• Checkthatthepowersupply’selectricalplugisfunctioningcorrectly.

Try another electrical product to verify.

 • CheckthatyouhavestartedaPerfectorTurbocleaningcycle.

ISSUE: The cleaner seems to be performing less efficiently.

SOLUTION:• Ensurethesurfaceofthebrusheshavenotbecomesmooth.

We recommend that the brushes are changed every two (2) years,

or sooner if they are worn.

 • Ensurethefilterelementisnotfullorclogged.

If it is, simply clean it.

 • Ensurethefloatingcableisnotexcessivelycoiledortwisted.

For further troubleshooting information, please contact Zodiac Pool Systems, Inc.

at 800-822-7933.

ELECTRICAL CERTIFICATIONS

SAFETY STANDARDS:

Baracuda

S3 Robotic is ETL listed

to UL Standards.

This product is manufactured in

accordance with UL 1081 5th Edition

listed test standards.