Owner`s manual

16
TROUBLESHOOTING
PROBLEM SOLUTION
Alpha 3
™
patterns or doesn’t Use Pool Pulse
™
to confirm proper flow (see pg 12).
cover majority of pool. Divert all return inlets
(see pg 6).
Confirm proper hose length
(see pg 7).
Check hose for memory
(see pg 13).
Add hose weight 4' to 7' from cleaner head
(see pg 15).
Use 45º elbow on wall vacuum installations
(see pg 10).
Coverage will be limited with the use of a solar blanket.
Note: In cold water 60º or less, water flow must be
increased to compensate for reduced flexibility of hose
and diaphragm (see pg 11).
Alpha 3 sticks at steps. Utilize flow as shown in coverage section
(see pg 15).
Add hose weight 4' to 7' from cleaner head
(see pg 15).
Reduce flow to low side of “ideal” range
(see pg 12).
Shorten hose if necessary.
Alpha 3 won’t move Use Pool Pulse
™
to confirm proper flow (see pg 12).
or moves slowly. Backwash filter (sand or DE) or soak cartridge style filter
overnight – consult your pool dealer.
Empty all baskets.
Tighten hose connections.
Check hoses for leaks.
Check diaphragm for damage or blockage
(see pg 14).
Note: In cold water 60º or less, water flow must be
increased to compensate for reduced flexibility of
hose and diaphragm.
Alpha 3 won’t move Use Pool Pulse
™
to confirm proper flow (see pg 12).
or moves slowly and air Check hoses for possible leak.
bubbles are noticeable Confirm proper water level in pool.
at the return jets. Replace and lubricate pump lid “O” ring – see your
pool dealer.
Alpha 3 won’t climb walls. Machine may not climb walls of some vinyl pools or
pools with safety ledges.
Confirm proper hose length
(see pg 7).
Use Pool Pulse
™
and raise flow to high side of “ideal”
range (see pg 12).
Alpha 3 stays on walls Use Pool Pulse
™
to lower flow to low side of “ideal”
or edge of pool. range (see pg 12).
Alpha 3 sticks at ladder. Install ladder guard
(see pg 17).
IF ASSISTANCE IS REQUIRED, CALL 1-888-786-7797