Owner`s manual

FLOW ADJUSTMENT
FOR POOLS WITH WALL VACUUM FITTINGS AND
FOR POOLS WITH TWO SKIMMERS
IDEAL TOO HIGH TOO LOW
Remove the cleaner head. Attach the
Pool Pulse
™
to the end of the hose.
You
MUST keep the Pool Pulse
™
and hose under water.
• For pools with a wall vacuum fitting, leave
the wall vacuum fitting fully open and slowly
close the skimmer valve until the blue
indicator of the Pool Pulse
™
falls into the
ideal range (when viewed from the side).
•
For pools with two skimmers, leave the
selected skimmer open and slowly close the
other skimmer until the blue indicator of the
Pool Pulse
™
falls into the ideal range (when
viewed from the side).
Remove the Pool Pulse
™
. Submerge the
cleaner head. When the bubbles stop coming
from the extension pipe, attach the hose end.
Your installation is now complete.
11