User guide

BaracodaManager v3.20 User guide June 2005

The “My Paired Devices” section of the window shows the configured barcode reader(s) and their connection status

(Connected/Disconnected/Connecting).

>>The table below shows the main functions available in the Baracoda Manager main window (for details, see

FUNCTIONS section):

Clicking on the button … allows you to…

Search Find all discoverable barcode readers (which are within the Bluetooth radio signal

range).

Add Selected Add or remove the selected barcode reader to the list of configured (paired)

barcode readers (in the “My Paired Devices” list).

Settings Set the parameters of the selected barcode reader.

>>Disconnect/Connect Disconnect the selected barcode reader or

reconnect a disconnected barcode reader

Upload Upload barcodes previously stored in the selected barcode reader’s non-volatile

memory.

Hide Minimize the Baracoda Manager window.

Exit Quit the Baracoda Manager and save information on the configured barcode

reader(s). The Bluetooth radio connection is closed. The barcode reader(s)

switches to stand-by mode.

Check box, left of the barcode

reader's ID

Set the Auto Connect mode for the barcode reader: the Baracoda Manager

automatically tries to connect to the barcode reader, at the beginning of the next

session.