User guide

BaracodaManager v3.20 User guide June 2005

12.1

Upgrading the barcode readers

This function works only with BaracodaPencil and with the Roadrunners. It will soon be available for the 2604 and the

BCM series.

In order to upgrade your BaracodaPencil you will first have to erase the existing firmware from your Pencil and only

after you will be able to upload the new firmware.

Select a connected barcode reader in the “My Paired Devices” list and click on Settings:

Click on the Button Upgrade and confirm your choice.

A new pop up windows will confirm that the Operation Succeeded.

At this stage the barcode reader will have a very ancient firmware version. In order to continue the upgrade you will

need to disconnect the barcode reader, make a hard reset, reconnect and go back to the Settings page.

Click on the button Upgrade.

Browse for the upgraded firmware. The File BPU_1_x.bpu will be in the same directory where you downloaded the

BaracodaManager. The standard directory is C:\Program Files\Baracoda Manager