User guide

BaracodaManager v3.20 User guide June 2005

BCM settings (for BCM2604-L and BCM2604-F)

The Settings window displays five buttons and in four smaller windows:

General information

Shutdown Timers

Operating modes

Other settings

The following two tables show the General information fields:

The field… Shows you…

Radio The version of Bluetooth chipset

Decoder The version of Embedded Baracoda software

The field… Shows and allows you to modify…

Name The name of the barcode reader

The following table shows the Shutdown Timer fields that you can set:

The field……

Allows you to…

When connected

Set, in the Minutes field, the amount of time after which the barcode reader switches

off, when the barcode reader is connected and idle.

Not connected Set, in the Minutes field, the amount of time after which the barcode reader switches

off, when the barcode reader is not connected and idle.

The table below shows you the Operating Mode fields that you can set:

Checking the box… Allows you to…

Real-time Set the Real-time mode: scanned barcodes are transmitted to your application

immediately when the Bluetooth radio connection is active. If the connection is not

established the barcodes are lost when the barcode reader turns off.

Master Set the Master mode: The barcode reader automatically creates connection to the

specified Host device when you scan a barcode. Then the reader works as in real time

mode.

Host addr. For use in Master mode : Set, in the address field, the Bluetooth address of the host

device your reader has to connect.