User guide

BaracodaManager v3.20 User guide June 2005

The following table shows the Shutdown Timer fields that you can set:

Checking the box…

Allows you to…

When connected

Set, in the Minutes field, the amount of time after which the barcode reader switches

off, when the barcode reader is connected and idle.

When not connected Set, in the Minutes field, the amount of time after which the barcode reader switches

off, when the barcode reader is not connected and idle.

The following table shows the Other Settings buttons that you can set:

Product Access further product settings (see below)

Bluetooth Access further Bluetooth connection settings (see below)

Symbology Access to types of barcodes settings (see below)

The table below shows the actions you can take with the buttons:

The button…

Allows you to…

Cancel Close window with no change

Save Record and send the new parameters to the barcode reader.

Default Settings Restore the factory settings. The barcode reader (flash) memory is erased and the

factory default parameters are restored. Check your device manual for details.

Upgrade Upgrade the BaracodaPencil with the latest version of the firmware. See chapter 12 for

more information about the upgrade procedure.

7.1

Product

Find details about product settings in your barcode reader User Manual.

Check the box in order to activate

bufferisation of barcodes if those

barcodces are read when the

Barcode reader is not connected

and in real Time mode

When Prefix/Suffix box is checked,

select Data Format (ASCII or Hex)

and type values in active fields.

Check the box to

activate Baracoda

Header

Check the box to

activate prefix &

suffix fields.