User guide

Baracoda ScanWear – User Guide
September 07 11
7.
Configuring your sc anner
BaracodaManager is software for settings the scanner.
7.1.
Res et your scanner
To reset the scanner to its “default settings”, use BaracodaManager Software or scan the Reset
configuration barcode.
Reset
7.2.
Securi ty
The Bluetooth connection is secured with a PIN code authentication.
You can configure security (enable/disable/change PIN code) through BaracodaManager.
The Security is enabling by default: default PIN code is 0000.
7.3.
No data lo ss mode
Baracoda has developed a proprietary communication protocol in order to enhance the security of the
Bluetooth transmission.
Every barcode sent to the host must be acknowledged by the host (until then, the scanner will transmit it
again and again).
This acknowledgment is disabled in default settings. It is strongly recommended to set ON this protocol
acknowledgment on when using the scanner with the BaracodaManager.
Additionally, this protocol acknowledgment allows having an audio acknowledgment that the barcode has
been successfully transmitted to the host.
You can configure or disable the scanner acknowledgement through BaracodaManager.
7.4.
Sym bology
You can enable/disable any type of barcode decoders with BaracodaManager.