Datasheet

Serial Dongle User Guide
4.2 Reset Button
In operating mode (dongle or cradle mode, any LED colour but red), a short press on the reset button stops
e.
long press (5 seconds) while the serial dongle is configured in cradle mode and waiting for a connection
e serial dongle is configured in dongle mode (Slave role) will make it connect
the first Bluetooth product accepting as default pin code the last 4 bytes of its BD Address (normally a
long press in configuration mode restores the factory settings and restarts the adapter.
any Bluetooth activities, breaks existing pairing and then makes the adapter enter configuration mod
In configuration mode, a short press on the reset button will restart the adapter in operating mode.
A
(slow orange blinking) will make it connect to the first barcode reader accepting “0000” for PIN code.
A long press (5 seconds) while th
to
second Baracoda serial dongle).
A
5 Compatibility with Baracoda Scanners
Pairing to the serial Dongle by scanning the specific “pairing barcode” is possible with the BC/BL/BLR2604
inimum Bluetooth version required: 1.6 and minimum Decoder version required BT085), BCM 2604-L (All)
and Barac 1.5).
y the process, all original boxes sold by
Baracoda with products compatible with the Baracoda Serial Dongle, are marked with a
he connection in cradle mode of the serial dongle with a Baracoda scanner can be achieved on BL-1000,
BL/BC-2604, BCM 2604-L and Pencil, except Pencils with Bluetooth version 1.0.
(m
odaPencil (minimum Bluetooth version required 1.5 and minimum Decoder version required
- Baracoda perfectly understands that the end user may not have the ability to check the
version of the scanners. In order to simplif
light green round-shaped self-adhesive label -
T
© Baracoda 2004 Page 7/9