User's Manual

(6) Advanced setup
Figure3-4. Advanced setup of WPC293
Beacon Lost Count
‘Beacon Lost Count’ reflects to ‘Loaming function’, which automatically switches the access
points when the node moved from a service area to another, at the situation that there are
many access points. Larger count takes longer time to detect APs.
Power Management Mode
Sets the function of low power consumption. By setting this mode ‘on’, it becomes Power
Save Mode. This mode can be set only when Infrastructure Mode.
RTS
Sets RTS Threshold value. Set within the range of 0 to 2347.
Fragmentation
Sets Fragmentation Threshold value. Set within the range of 256 to 2346.
11