User's Manual

10
2.3 Installation
The PresentationMaster software disc will automatically open the installation program and will guide you through the process.
Both the sender and the receiver programs will be installed, the icons will be added to the laptop, and you can then either open the
Sender or open the Receiver program according to your needs.
Please follow the steps as below to complete all application.
2.3.1 Installing Wireless Multimedia Card
2.3.1.1 The Wireless Multimedia Card can be inserted into your computer’s PCMCIA slot when the computer
power is either turned on or off.
Caution: Do not force the Wireless Multimedia Card into the slot or
severe damage to the computer may occur.
2.3.1.2 The red LED on the Wireless Multimedia Card will light when the Wireless Multimedia Card is inserted into
the PCMCIA slot and the computer is turned on.
2.3.1.3 Insert the end of the Wireless Multimedia Card into the PCMCIA slot of your computer with the printed
label facing up, and slide it in until it is firmly seated.
2.3.2 LEDs on Wireless Multimedia Card
The two LEDs on the Wireless Multimedia Card indicate connection status and data transfer operation status, as
described below:
● Power LED
- Off when the driver of wireless multimedia card is not installed or wireless connection is disabled.
- Blinking when the driver of wireless multimedia card is installed.
● Activity LED
- Off when no data is transmitted or received.
- Blinking when the data is transmitted or received.