User's Manual

53
b. Moderator can click on the “play” button to allow the projecting.
c. Moderator can assign which user to project on which screen by clicking on the
screen numbers.
d. Moderator can “stop” the projecting anytime.
6) Uncheck the “Allow Control from this page only”, it will disable the centralized
control and user can project the screen to WiPG-2000S freely.
7) Moderator can log out from the conference control mode by clicking on the” log
out” on the upper right corner.
10.3 Admin
1) Click on “Admin” and then enter the password to login web admin page. (Default
Password: admin)
10.4 System Status
1) Click on “System Status” option, it will show current system status.
Model Name: Product model name
Versions:
 Firmware version no.: Product firmware version number.
Device Information:
 Resolution: Device output resolution.
 Host Name: Device network hostname.
Network Status:
 IP address：IP address of WiPG-2000S device.
 Subnet Mask：subnet mask
 Default Gateway：default gateway