User's Manual

11
6 Quick Installation
1) Connect wePresent WiPG-2000S device to Projector/display through VGA/HDMI
port and turn on projector/display power.
2) Connect the power adaptor to WiPG-2000S device and press the power button to
turn on WiPG-2000S device. System will be ready when the LED light turns to blue.
 WiPG-2000S can also be powered by Ethernet Cable (Power over Ethernet).
 It will show the default standby screen as below when system is ready.
3) Insert the speaker cable to WiPG-2000S audio jack for audio output
4) Insert the USB mouse or keyboard or USB touch device to WiPG-2000S front/rear
USB port for On-Screen Display (OSD) control. (Optional)