wePresent SharePod User's Manual Version: 0.
Table of Contents 1 2 3 4 5 5.1 5.2 6 6.1 6.2 7 7.1 7.2 7.3 7.4 7.5 7.6 7.7 7.8 7.9 7.10 OVERVIEW .................................................................................... 3 PACKAGE CONTENTS ........................................................................ 4 PHYSICAL DETAILS ........................................................................... 4 WHAT YOU MIGHT NEED ................................................................. 5 WEPRESENT SHAREPOD PAIRING ........................
1 Overview wePresent SharePod is a unique wireless collaboration solution for HDMI devices and wePresent which connects any HDMI source to wePresent receiver wirelessly and enables the collaboration feature easily for the meeting room and classroom. By connecting the HDMI cable to SharePod, it will mirror the audio/video from supported HDMI device to big screen immediately, no any software installation or complicated configuration required.
2 3 Package Contents wePresent SharePod device Power Adapter (DC +5V, 1.
Description Play/Stop Button Press button to start/stop mirroring. HDMI In HDMI source input. Micro USB USB 2.0 port for device pairing. Ethernet 10/100M RJ-45 port. Power Jack Power Jack 5V/1.2A Reset Button Press this reset button to execute the hardware reset. 4 5 What You Might Need wePresent receiver device Projector/display with VGA/HDMI interface HDMI Source device such as Document Camera, Digital Microscope, Laptop, DVD Player.
5.2 Manual pairing 1) Plug in the micro USB cable from SharePod to laptop and launch the configuration tool from the CD-ROM disk, then you can configure the pairing information manually as below.
6 wePresent SharePod Mirroring 6.1 SharePod Mirroring 1) Power on the SharePod device, it will connect to the target wePresent receiver. The short blinking blue LED indicates the system is trying to connect to target wePresent receiver, and it will switch to long blinking blue LED when it is connected. 2) Plug in the HDMI cable to the supported HDMI source device, it will start the mirroring automatically if the wePresent receiver is standby, or you can press the PLAY button to start the mirroring.
Short Blinking Blue (0.5 sec) Connecting Pairing with wePresent receiver again. Long Blinking Blue (2 sec) Waiting for HDMI Check HDMI source. Short Blinking Red (0.5 sec) Error (Wrong login code or rejected by Conference Control) Pair with wePresent receiver again, or disable the Conference Control. Long Blinking Red (2 sec) Pairing Mode 6.
the browser to visit the SharePod web admin. 2) Enter the password to login the admin page. (default password: admin) 7.2 System Status 1) Click on “System Status” option, it will show current system status. Model Name: Product model name Versions: Firmware version no.: Product firmware version number. Network Status: IP address：IP address of SharePod device.
7.3 Device Setup 1) Click on “Device Setup” option, it will show the device setting items, : The IP address of target wePresent receiver : The login code of target wePresent receiver. : The name of this SharePod device : Normal / High.
7.4 Network Setup 1) Click on “Network Setup” option, it will show the network setting items, < IP Setup> You can select “obtain IP address automatically” or “Use the following IP address” to enter the IP address. The default setting is as following: IP Address: 192.168.100.10. Subnet Mask: 255.255.255.0 Default Gateway: 192.168.100.10 DNS Server: 192.168.100.10 7.
Note: 1. The WiFi 5G DFS band is not supported. 7.6 Change Passwords 1) Click on “Change Password” option, you can change the password setting for “Admin”. (Length: up to 8 characters) : Confirm and Save modifications.
7.7 Reset to Default 1) Click on “Reset to Default” option to restore factory default settings. : Confirm and take action. *** You can also restore factory default setting from SharePod box reset button. You can find the reset button underneath the box. Please follow below procedures. 1. Press [Reset] button and Hold. 2. Turn on wePresent SharePod box. 3. Press more than 10 seconds and relief [Reset] button. 4. It will take effect to restore factory default settings. 7.
Warning: Don’t power off wePresent SharePod while firmware upgrade in progress, otherwise you will damage your box and have to return device to your vendor for fixing.
7.9 Reboot System 1) Click on “Reboot System” option, you can restart the system 7.10 Click on button: reboot system automatically. Logout 1) Click on “logout” on the up right corner, you can logout the administration webpage and return back to the web management front page.
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
