Specification Sheet

BAR’S LEAKS TECHNICAL BULLETIN
Tech Bulletin #: TB-1600-1
Page 1 of 2
Date 1
st
Issued: May 5, 2006
Date Revised: July 22, 2013
ISO 9001 CERTIFIED
Bar’s Leaks Power Steering Repair
Part #: 1600
Bar’s Products, 10386 N. Holly Rd., Holly MI 48442 USA
E-mail: [e-mail] Web: www.barsleaks.com Phone: [phone]
DIRECTIONS
Adding to Power Steering Fluid
 Remove power steering dipstick and check reservoir
fluid level. Tip. On most vehicles, this is on or near the
belt driven power steering pump. Consult owners’
manual for location. If fluid is low, pour equal amounts
from the two chambers into reservoir. At least half of
bottle should be used. Do not overfill . Tip. If
necessary to prevent overfilling, drain or siphon some
power steering fluid from reservoir. Check fluid level
again. Top off with manufacturer’s recommended power
steering fluid as needed. Replace dipstick and drive 5
to 10 minutes to circulate fluid. Depending on the power
steering problem, results will either be immediate or
noticeable within (2) days or 100 miles of driving. In
seriously damaged power steering systems, a second
treatment may be required. In this case, it is suggested
that the power steering fluid be changed and a second
application of Power Steering Repair be added.
Changing Fluid
 If using Power Steering Repair when changing power
steering fluid, add entire contents of bottle. Then top off
with manufacture’s recommended fluid to proper level.
Drive vehicle and recheck fluid level.
Bar’s Leaks Power Steering Repair is a unique dual cavity bottle containing a combination
of the best performance additives to repair the most common power steering fluid related
problems. For most vehicles, this is your last chance before paying an expensive repair bill
or replacing the vehicle. Power Steering Repair can be used to top-off the existing fluid
when low, or add a bottle when changing fluid. Works on all vehicles, domestic and import.
Compatible with ALL types of power steering fluid, including petroleum, mineral oil and
synthetic formulas. Use one bottle to top off or restore fluid level. Depending on the power
steering problem, results will either be immediate or noticeable within 2 (two) days or 100
miles of driving.
The common element between all of the power steering components is the fluid. The fluid
touches everything inside the pump, gearbox and rack & pinion. This fluid must lubricate,
cool, clean and pressurize for the system to function. In newer systems, the power steering
fluid can easily perform these functions. As the vehicle ages and gains more miles, the
fluid alone can’t do the job. Internally, pumps whine, gears have play in them, valves stick,
seals leak and the fluid quickly breaks down. When installed, Bar’s Leaks Power Steering
Repair helps to stop and prevent these problems and enhances the useful life of your
power steering system.
Part Number: 1600
UPC Item: 0 46087 01600 8
UPC Case: 1 00 46087 01600 5
Bottle Size: 16 fl. oz. (473 ml)
Bottle Dimensions: 3.6 x 1.8 x 8.4375
Bottle Cube: 55
Case Pack: 4 bottles
Case Size: 7.25 x 3.875 x 8.875
Case Cube: 249
Case Weight: 5 pounds
Pallet: TI 60 HI 5 Total 300
DOSAGE
One bottle treats 2 to 3 quarts of fluid. For
larger systems use one bottle for every 2.5
quarts of capacity.
POWER STEERING REPAIR